Back to results

Virginia Tech

Shape Memory Alloy / Glass Composite Seal for Solid Oxide Fuel Cells

Abstract

dc:description.abstract

Widespread use of solid oxide fuel cells is hindered by a lack of long-term durability of seals between metallic and ceramic components caused by thermal expansion mismatch induced cracking. A novel gas seal design incorporating an engineered thermal expansion gradient in a SrO-La₂O₃-A₂O₃-B₂O₃-SiO₂ glass matrix with a TiNiHf shape memory alloy mesh for active stress relief and crack healing is being developed. Coefficient of thermal expansion (CTE) measurements of the seal and fuel cell components shows the possibility for a thermal expansion gradient. Differential scanning calorimetry and microscopy have shown that the TiNiHf alloy has a shape memory transition in the desired range of 200-250ºC. The oxide glass partially crystallizes during thermal cycling which has been observed through X-ray diffraction and dilatometry. The CTE decreases from 9.3Ã 10-6/°C to 6.6Ã 10-6/°C after thermal cycling. Neutron diffraction data from TiNiHf /glass composite samples reveals that the TiNiHf alloy has the ability of absorbing residual stresses from a glass matrix during martensitic phase transition. There is evidence from microscopy that the glass composition is important in determining if reaction will occur with the TiNiHf alloy. The TiNiHf alloy mesh structures can be created using the 3D printing process. This process has been adapted to allow for printing of very thin wire mesh structures of Ni and NiTi powders with a more suitable binder solution. A bi-layer test fixture has been developed which will be useful for assessing leak rate through seal materials.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Materials Science and Engineering
Department dc:contributor.department
Materials Science and Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2007

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Story, Christopher B.
Chair dc:contributor.committeechair
  • Lu, P. Kathy
Committee members dc:contributor.committeemember
  • Pickrell, Gary R.
  • Reynolds, William T. Jr.

Subjects

dc:subject × 7

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
etd-05182007-112950
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/42709

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Story, Christopher B.. Shape Memory Alloy / Glass Composite Seal for Solid Oxide Fuel Cells. masters thesis, Virginia Tech, 2007. http://hdl.handle.net/10919/42709