Back to results

The University of Western Ontario

Concrete Bridge Girders with Exposed Flexural Reinforcement

Abstract

dc:description.abstract

Reinforced concrete highway bridge girders are regularly repaired by replacing deteriorated concrete with new concrete, temporarily exposing the flexural reinforcement. The absence of bond between the concrete and steel at this stage makes it difficult to compute the flexural capacity and the current code criteria provide no guidance to assist practitioners. The research reported in this thesis rectifies this knowledge gap. A thorough examination is presented of experimental and analytical investigations by others to determine the typical behaviour, including probable failure modes, of reinforced concrete specimens with exposed flexural reinforcement. Based on these findings, two analytical approaches are developed to predict the longest length of flexural reinforcement that could be exposed that ensures a girder will still exhibit a ductile failure with no reduction in yield capacity. The Strain Compatibility Analysis derived by Harris was enhanced to involve realistic concrete stress-strain relationships and was validated experimentally using five 4-metre T-section specimens subjected to simultaneous point and uniformly distributed loading. A Strut-and Tie Analysis was also derived for this generic loading condition that could only be indirectly validated experimentally. The ratios of the test failure load to the failure load predicted using the Strain Compatibility Analysis had a mean value of 1.00 and a standard deviation of 0.068.

Degree

thesis:*
Name thesis:degree_name
M Eng Sci
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor dc:publisher
The University of Western Ontario
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Scott, Trevor K
Advisor dc:contributor.advisor
  • Bartlett, F. Michael

Subjects

dc:subject × 6

Rights

Language dc:language.iso
en_ca

Identifiers

dc:identifier.*
OAI identifier oai:identifier
oai:uwo.scholaris.ca:20.500.14721/33004

Chain of custody

source
Harvested from
Western University
Base URL
uwo.scholaris.ca/server/oai/request
Last updated
2026-07-27
Source record
OAI-PMH GetRecord
citation

Scott, Trevor K. Concrete Bridge Girders with Exposed Flexural Reinforcement. The University of Western Ontario, 2013. https://hdl.handle.net/20.500.14721/33004