Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 5 of 5 for “"Distributed Loading"”.
-
Concrete Bridge Girders with Exposed Flexural Reinforcement
… subjected to simultaneous point and uniformly distributed loading. A Strut-and Tie Analysis was also derived for this generic loading condition that could only be indirectly validated experimentally. The ratios of the test failure load to the failure load predicted using the Strain …
-
Acoustic Response Validation of a Finite Cylindrical Shell with Multiple Loading Conditions
… conditions. These models also ignore complex loading conditions such as plane waves in favor of point forces or free vibration models. This work expands on the capabilities of these models by examining the acoustic response of a finite length cylinder with flat plate endcaps to multiple types …
-
Strength and Performance of Steel Fiber Reinforced Concrete Post-Tensioned Flat Plates
… 10ft x 3in. bays along with a 2ft-6in. overhang. Distributed loading was applied with a whiffle tree loading system at each bay and overhang section. Throughout the test, crack widths, crack locations, deflections, concrete strains, and reinforcing bar strains were monitored. The post-tensioned …
-
Influencia de la distribución de la carga en la capacidad resistente a cortante en elementos sin armadura transversal : estudio teórico y experimental
… by simply supported beams subjected to point loading, the distance from the support to the load being greater than 2.5 times the effective depth of the elements. It is also observed that most tests are carried out using reinforcement ratios very much above the values common in engineering …
-
Design and Performance of Reinforced Concrete Elements with Spatial Tailoring of Concrete Properties
… transverse reinforcement subjected to uniformly distributed loading, establish a baseline and enable the comparison of design options. Additional design constraints are imposed on layered elements, compared to conventional single-mix elements, to ensure that premature failure does not occur at …