Back to results

University of Illinois at Urbana-Champaign

Influence of wettability on boiling heat transfer and critical heat flux in vertical flow boiling

Abstract

dc:description

The critical heat flux (CHF) marks the upper limit of safe operation of heat transfer systems that utilize two-phase boiling heat transfer. In a heat-flux-controlled system, exceeding the CHF results in rapid temperature excursions which can be catastrophic for system components. In nuclear power generation, the initiation of a CHF event may cause fuel damage through fuel melting or through zircaloy oxidation. CHF marks the upper limit for safe reactor operation in light-water reactor systems. The understanding of the physical triggering mechanisms for CHF and the accurate prediction of CHF values is important not only for safe reactor operation, but also for efficient plant design and effective fuel utilization. Gamma radiation present in commercial nuclear reactors may affect the surface wettability of fuel rods through the Radiation Induced Surface Activation (RISA) effect, and present power limits on nuclear reactors may be underestimated. Recent studies have focused on the influence of surface wettability on the departure from nucleate boiling (DNB) through surface modifications and coatings, though many of these studies are limited to pool boiling systems. In this thesis, the surface wettability influence is studied on the boiling curves and specifically the point of DNB. A femtosecond laser is used to texture the surface to change the wettability from hydrophilic to hydrophobic. A parametric study is performed with mass flux, pressure, and inlet subcooling in a vertical rectangular channel that is heated from one side. CHF excursions are triggered under various system conditions and are compared with existing models. For the experimental conditions considered, the hydrophobic surface showed delayed onset of nucleate boiling compared to the hydrophilic surface, shifting the boiling curves to higher wall superheat. The hydrophobic surface also showed significantly lower CHF for the same system conditions and less sensitivity to changes in subcooling. Few models accurately predicted the initiation of CHF, and a more conservative model is needed that more accurately incorporates the effect of surface wettability.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Nuclear, Plasma, Radiolgc Engr
Grantor
University of Illinois at Urbana-Champaign
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bottini, Joseph Larkin
Contributors dc:contributor
  • Brooks, Caleb S.
  • Kozlowski, Tomasz

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Copyright 2018 Joseph Bottini
Language dc:language
en

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2142/101070
OAI identifier oai:identifier
oai:www.ideals.illinois.edu:2142/101070

Chain of custody

source
Harvested from
University of Illinois - Urbana-Champaign
Base URL
www.ideals.illinois.edu/oai-pmh
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Bottini, Joseph Larkin. Influence of wettability on boiling heat transfer and critical heat flux in vertical flow boiling. Thesis thesis, University of Illinois at Urbana-Champaign, 2018. http://hdl.handle.net/2142/101070