Flow injection analysis (FIA) determination of lead by hydride generation in banded coral skeletons /

A flow injection hydride generation direct current plasma atomic emission spectrometric (FI-HG-DCP-AES) method was developed for the determination of lead at ng.ml-l level. Potassium ferricyanide (K3Fe(CN)6) was used along with sodium tetrahydroborate(III) (NaBH4) to produce plumbane (PbH4) in an acid medium. The design of a gas-liquid separator (hydride generator) was tested and the parameters of the flow injection system were optimized to achieve a good detection limit and sample throughput. The technique developed gave a detection limit of 0.7 ng.ml-l(3ob). The precision at 20 ng.ml"* level was 1.6 % RSD with 1 1 measurements (n=l 1). Volume of sample loop was 500 |J.l. A sample throughput of 120 h"^ was achieved. The transition elements, Fe(II), FeOH), Cd(n), Co(II), Mn(n), Ni(II) and Zn(n) do not interfere in this method but 1 mg,l'l Cu(II) will suppress 50 % of the signal from a sample containing 20 ng.ml'l Pb. This method was successfully applied to determine lead in a calcium carbonate (CaC03) matrix of banded coral skeletons from Si-Chang Island in Thailand.

Name thesis:degree_name

M.Sc. Chemistry

Level thesis:degree_level

Masters

Discipline thesis:degree_discipline

Faculty of Mathematics and Science

Department dc:contributor.department

Department of Chemistry

Grantor

Brock University

Year dc:date.issued

1997

Author dc:creator

• Tantreamjitmun, Napa.

• Atomic emission spectroscopy.
• Hydrides.
• Scleractinia.
• Lead toxicology.

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/10464/1270

OAI identifier oai:identifier

oai:brocku.scholaris.ca:10464/1270