Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 78 for “"stress-corrosion cracking"”.
-
Stress corrosion cracking of austenitic stainless steels
In order to understand the stress corrosion cracking behavior of metastable and stable austenitic stainless steels, constant elongation rate tests (CERT) and sub-critical crack growth (SCG) tests were used to measure the susceptibility and cracking rate. The tests were performed in …
-
Stress corrosion cracking of nuclear grade steels
… pressure vessel steel were studied for their stress corrosion cracking susceptibility. Cylindrical tensile specimens were subjected to slow strain rate testing at 75°C in aerated, aqueous solutions (distiled water with 1000ppm Cl⁻ or SO₄ = ions in solution) in a range of corrosion potentials. …
-
Evaluation of stress-corrosion cracking in rubidium hydroxide, An
Includes bibliographical references.
-
Transgranular Stress-Corrosion Cracking of a Magnesium - Aluminum Alloy
Made available in DSpace on 2014-12-14T16:00:25Z (GMT). No. of bitstreams: 1 7524276.pdf: 4574953 bytes, checksum: 48ff473bbe4017b6414eebea6af6e135 (MD5) Previous issue date: 1975
-
Stress corrosion cracking of Zircaloy in the prescence of iodine
Thesis (Sc.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1981.
-
Stress Corrosion Cracking of a Transformation Induced Plasticity Fe39Mn20CO20Cr15Si5Al1 High Entropy Alloy
Stress corrosion cracking (SCC) is a materials degradation phenomenon in which a susceptible material (metal) fails below its yield strength in a brittle manner because of the concomitant effect of a tensile load and a corrosive environment. After achieving a critical crack length, the component …
-
Stress-Corrosion Cracking of an Alpha-Phase Copper Alloy in Ammoniacal Solutions
Made available in DSpace on 2014-12-14T16:00:36Z (GMT). No. of bitstreams: 1 7804177.pdf: 6025654 bytes, checksum: 569585fdb7556ccfb827eb521d92d0d5 (MD5) Previous issue date: 1977
-
Evaluation of stress corrosion cracking of high-nitrogen Cr-Mn stainless steel
The stress corrosion cracking susceptibility of an experimental high nitrogen Cr-Mn stainless steel, known as Cromanite ™, and conventional AISI 304 stainless steel were investigated in order to compare their stress corrosion performance in solutions where AISI 304 stainless steel is known to be …
-
Stress corrosion cracking and corrosion of carbon steel in simulated fuel-grade ethanol
… ethanol or blended fuel is the potential corrosion and stress corrosion cracking (SCC) susceptibility of carbon steel pipelines in these environments. Both phenomenological and mechanistic investigations have been carried out in order to address the possible degradation phenomena of X-65 …
-
Stress corrosion cracking behavior of friction stir processed ultrafine grained light metal alloys
… a microstructural modification tool, on the corrosion behavior of Al-Mg, Al-Mg-Sc, Mg-Al-Zn and Mg-Y-RE alloys has been studied. An attempt has been made to establish correlation between processing parameters and the subsequent microstructural evolution especially matrix grain size on the …
-
Effect of residual stress gradients in austenitic stainless steels on stress corrosion cracking
The effect of the residual stresses developed during simulated weld heat affected zone in austenitic stainless steel specimen on the stress corrosion cracking susceptibility was studied. Residual stresses was measured using X-ray diffraction technique. Boiling Magnesium Chloride was used as …
-
Corrosion and Stress-Corrosion Cracking of Alpha-Phase Copper - Zinc Alloys in Aqueous Ammonia
Made available in DSpace on 2014-12-14T16:00:30Z (GMT). No. of bitstreams: 1 7624057.pdf: 5381427 bytes, checksum: aa510a98a05f98b9e54cde452ffdb784 (MD5) Previous issue date: 1976
-
Stress corrosion cracking and hydrogen embrittlement of thick section high strength low alloy steel
… experimental study was conducted to evaluate the corrosion performance of weldments of a high strength low alloy(HSLA) steel in a simulated seawater environment. This steel, designated HSLA80, was developed by the United States Navy for use in ship structural applications. Stress corrosion …
-
A method of testing stress-corrosion cracking in magnesium alloy FS-1 extruded bar
… is its susceptibility to various forms of corrosion. Stress-corrosion cracking, occurring under conditions of residual fabrication stresses or high external stresses, is a severe localized corrosion type which can bring about complete failure in most wrought magnesium alloys. Previous …
-
Surface residual stress effects on stress corrosion cracking/hydrogen embrittlement behavior of AISI 4340 steel
… to measure the effects of surface residual stresses on the stress corrosion cracking/hydrogen embrittlement (SCC/HE) behavior of AISI 4340 steel. Stress corrosion tests were performed under load control on cylindrical and notched tensile specimens in acidified 3.5% NaCl solution. The …
-
Stress corrosion cracking and crack tip characterization of Alloy X-750 in light water reactor environments
Stress corrosion cracking (SCC) susceptibility of Inconel Alloy X-750 in the HTH condition has been evaluated in high purity water at 93 and 288°C under Boiling Water Reactor Normal Water Chemistry (NWC) and Hydrogen Water Chemistry (HWC) conditions. SCC crack growth rates of approximately 1.1 x …
-
Effects of thermal aging on Stress Corrosion Cracking and mechanical properties of stainless steel weld metals
Stress Corrosion Cracking (SCC) in and around primary loop piping welds in Boiling Water Reactors has been observed worldwide as plants continue to operate at temperatures and pressures near 2880C (5500F) and 6.9 MPa (1000 PSI). An experimental program was designed to explore the effect of thermal …
Page 1 of 4