Back to results

Virginia Tech

Application of Optical Fiber Sensors for Quenching Temperature Measurement

Abstract

dc:description.abstract

The critical heat flux (CHF) point for a reactor core system is one of the most important factors to discuss in regards to reactor safety. If this point is reached, standard coolant systems are not enough to handle the temperature increase in the cladding, and the likelihood of meltdown greatly increases. While the nucleate boiling and film boiling regimes have been well-investigated, the transition boiling regime between the point of departure from nucleate boiling (DNB) and the minimum film boiling temperature (T<sub>min</sub>) remains difficult to study. This is due to both the complexity of the phenomena, as well as limitations in measurement, where experiments typically utilize thermocouples for temperature data acquisition. As a result of technological advancement in the field of fiber optics, it is possible to measure the quenching temperature to a much higher degree of precision. Optical fiber sensors are capable of taking many more measurements along a fuel simulator length than thermocouples, which are restricted to discrete points. In this way, optical fibers can act as an almost continuous sensor, calculating data at a resolution of less than one millimeter where a thermocouple would only be able to measure at one point. In this thesis, the results of a series of quenching experiments performed on stainless steel, Monel k500, and Inconel 600 rods at atmospheric pressure, with different subcooling levels and surface roughnesses, will be discussed. The rewetting temperature measurement is performed to compare results between thermocouples and optical fiber sensors in a 30 cm rod. These results are further discussed with regard to future application in two-phase flow experiments.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Nuclear Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hurley, Paul Raymond
Chair dc:contributor.committeechair
  • Pacheco Duarte, Juliana
Committee members dc:contributor.committeemember
  • Liu, Yang
  • Palmore, John A., Jr.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:25875
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/99035

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Hurley, Paul Raymond. Application of Optical Fiber Sensors for Quenching Temperature Measurement. masters thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/99035