{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/97011"},"canonical_url":"https://search.dev.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/97011","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Turbulent Boundary Layer over a Piezoelectrically Excited Traveling Wave Surface","abstract":"Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage.","abstract_html":"Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage.","abstract_has_math":false,"creators":["Musgrave, Patrick Francis"],"institution":"Virginia Tech","degree_name":"Ph. D.","degree_level":"doctoral","degree_discipline":"Mechanical Engineering","degree_department":"Mechanical Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Tarazaga, Pablo Alberto"],"committee_members":["Kochersberger, Kevin B.","Devenport, William J.","Kurdila, Andrew J.","Borggaard, Jeffrey T."],"year":2018,"date_issued":"2018-08-30","date_published":"2018-08-30","updated_at":"2026-07-22T22:18:44Z","subjects":["Turbulent Boundary Layer","Traveling Waves","Piezoelectric","Skin Friction","Two-Mode Excitation"],"languages":[],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:16932"],"render_values":[{"text":"vt_gsexam:16932","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/10919/97011","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Tarazaga, Pablo Alberto"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Kochersberger, Kevin B.","Devenport, William J.","Kurdila, Andrew J.","Borggaard, Jeffrey T."]},{"key":"dc:contributor.department","label":"Department","values":["Mechanical Engineering"]},{"key":"dc:creator","label":"Author","values":["Musgrave, Patrick Francis"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2020-02-22T07:01:10Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2020-02-22T07:01:10Z"]},{"key":"dc:date.issued","label":"Date","values":["2018-08-30"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["doctoral"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Turbulent Boundary Layer","Traveling Waves","Piezoelectric","Skin Friction","Two-Mode Excitation"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:16932"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/97011"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage."]},{"key":"dc:description.abstractgeneral","label":"General Abstract","values":["Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph. D."]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["ETD"]},{"key":"dc:title","label":"Title","values":["Turbulent Boundary Layer over a Piezoelectrically Excited Traveling Wave Surface"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Tarazaga, Pablo Alberto"],"dc:contributor.committeemember":["Kochersberger, Kevin B.","Devenport, William J.","Kurdila, Andrew J.","Borggaard, Jeffrey T."],"dc:contributor.department":["Mechanical Engineering"],"dc:creator":["Musgrave, Patrick Francis"],"dc:date.accessioned":["2020-02-22T07:01:10Z"],"dc:date.available":["2020-02-22T07:01:10Z"],"dc:date.issued":["2018-08-30"],"dc:description.abstract":["Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage."],"dc:description.abstractgeneral":["Recent studies have utilized spanwise traveling waves to alter the turbulent boundary layer with the aim of reducing skin friction drag. Spanwise traveling waves are a promising active drag reduction technique; however, the wave generation methods used in previous studies are bulky and could not be practically implemented. This research has developed an implementable traveling wave generation method and then fundamentally demonstrated how it changes the turbulent boundary layer, which is in a manner consistent with skin friction/shear stress reduction. Traveling waves were generated on a two-dimensional surface using low-profile piezoelectric actuators, in an open-loop fashion, and with minimal frequency limitations. The wave generation method was developed to generate tailored traveling wave patterns; thus, yielding control over the propagation direction, number of wave-fronts, and regions of the surface containing traveling waves. These tailored traveling waves have the capacity not just for affecting the boundary layer, but also for other applications such as propulsion. The implementable traveling wave generation method was then tested in a low-speed wind tunnel and shown to alter the structure of the turbulent boundary layer. The boundary layer is pushed off the wall, and the viscous sublayer is thickened, indicating a reduction in shear stress. Analysis of the boundary layer at positions phase-locked to the wave oscillation suggests that the traveling waves induce a phase-lag effect in the flow. This phase-lag produces a stretching of the viscous sublayer and may contribute to the skin friction reduction. The effects of standing waves on the turbulent boundary layer were also investigated and compared with traveling waves. The results indicate that both wave types alter the boundary layer in the same manner. Standing waves are simpler to generate than traveling waves, suggesting that standing waves may be an effective skin friction reduction method. Before traveling or standing waves can be implemented, further research is necessary to investigate the interaction between the wave pattern and the turbulent phenomena and also to quantify the skin friction reduction and overall net energy usage."],"dc:description.degree":["Ph. D."],"dc:format.medium":["ETD"],"dc:identifier.other":["vt_gsexam:16932"],"dc:identifier.uri":["http://hdl.handle.net/10919/97011"],"dc:publisher":["Virginia Tech"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["Turbulent Boundary Layer","Traveling Waves","Piezoelectric","Skin Friction","Two-Mode Excitation"],"dc:title":["Turbulent Boundary Layer over a Piezoelectrically Excited Traveling Wave Surface"],"dc:type":["Dissertation"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["doctoral"],"thesis:degree_name":["Ph. D."],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-07-22T22:18:44Z"}