Development of an Energy-based Liquefaction Evaluation Procedure

Soil liquefaction during earthquakes is a phenomenon that can cause tremendous damage to structures such as bridges, roads, buildings, and pipelines. The objective of this research is to develop an energy-based approach for evaluating the potential for liquefaction triggering. The current state-of-practice for the evaluation of liquefaction triggering is the "simplified" stressbased framework where resistance to liquefaction is correlated to an in situ test metric (e.g., normalized standard penetration test N-value, N1,60cs, normalized cone penetration tip resistance, qc1Ncs, or normalized small strain shear wave velocity, Vs1). Although rarely used in practice, the strain-based procedure is commonly cited as an attractive alternative to the stress-based framework because excess pore pressure generation (and, in turn, liquefaction triggering) is more directly related to strains than stresses. However, the method has some inherent and potentially fatal limitations in not being able to appropriately define both the amplitude and duration of the induced loading in a total stress framework. The energy-based method proposed herein builds on the merits of both the stress- and strain-based procedures, while circumventing their inherent limitations. The basis of the proposed energy-based approach is a macro-level, low cycle fatigue theory in which dissipated energy (or work) per unit volume is used as the damage metric. Because dissipated energy is defined by both stress and strain, this energy-based method brings together stress- and strain-based concepts. To develop this approach, a database of liquefaction and nonliquefaction case histories was assembled for multiple in situ test metrics. Dissipated energy per unit volume associated with each case history was estimated and a family of limit-state curves were developed using maximum likelihood regression for different in situ test metrics defining the amount of dissipated energy required to trigger liquefaction. To ensure consistency between these limit-state curves and laboratory data, a series of cyclic tests were performed on samples of sand. These laboratory-based limit-state curves were reconciled with the field-based limit-state curves using a consistent definition of liquefaction.

Name thesis:degree_name

Doctor of Philosophy

Level thesis:degree_level

doctoral

Discipline thesis:degree_discipline

Civil Engineering

Department dc:contributor.department

Civil and Environmental Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2020

Author dc:creator

• Ulmer, Kristin Jane

Chairs dc:contributor.committeechair

• Rodriguez-Marek, Adrian
• Green, Russell A.

Committee members dc:contributor.committeemember

• Dove, Joseph E.
• Eatherton, Matthew R.

• earthquakes
• liquefaction
• dissipated energy
• cyclic direct simple shear

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

vt_gsexam:23751

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/96522