{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/90299"},"canonical_url":"https://search.dev.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/90299","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Turbine Engine Thrust Measurements Using a Non-Intrusive Acoustic Technique","abstract":"Experiments were conducted to measure the thrust generated from a commercial jet engine. This thrust estimation was done using a pneumatic horn as the sound source with two arrays of microphones directly across the exhaust stream. The two arrays were separated by an axial distance downstream. Exhaust centerline measurements were taken at varying engine conditions, specifically; 30%, 50%, 60%, 70%, 80% and 100% engine power. An acoustic thrust estimation showed good agreement with measured thrust during the test campaign. In addition, a full traverse of the acoustic rig through the exhaust stream was completed for the purpose of tomography reconstruction. This reconstruction technique was able to pick up key features of the flow field.","abstract_html":"Experiments were conducted to measure the thrust generated from a commercial jet engine. This thrust estimation was done using a pneumatic horn as the sound source with two arrays of microphones directly across the exhaust stream. The two arrays were separated by an axial distance downstream. Exhaust centerline measurements were taken at varying engine conditions, specifically; 30%, 50%, 60%, 70%, 80% and 100% engine power. An acoustic thrust estimation showed good agreement with measured thrust during the test campaign. In addition, a full traverse of the acoustic rig through the exhaust stream was completed for the purpose of tomography reconstruction. This reconstruction technique was able to pick up key features of the flow field.","abstract_has_math":false,"creators":["Boggs, George Lemuel IV"],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Mechanical Engineering","degree_department":"Mechanical Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Ng, Wing Fai","Lowe, K. Todd"],"committee_members":["Meadows, Joseph"],"year":2019,"date_issued":"2019-06-18","date_published":"2019-06-18","updated_at":"2026-07-22T22:20:02Z","subjects":["acoustic","tomography","Hartmann","non-intrusive"],"languages":[],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:21015"],"render_values":[{"text":"vt_gsexam:21015","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/10919/90299","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Ng, Wing Fai","Lowe, K. Todd"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Meadows, Joseph"]},{"key":"dc:contributor.department","label":"Department","values":["Mechanical Engineering"]},{"key":"dc:creator","label":"Author","values":["Boggs, George Lemuel IV"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2019-06-19T08:03:19Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2019-06-19T08:03:19Z"]},{"key":"dc:date.issued","label":"Date","values":["2019-06-18"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["acoustic","tomography","Hartmann","non-intrusive"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["vt_gsexam:21015"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/90299"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Experiments were conducted to measure the thrust generated from a commercial jet engine. This thrust estimation was done using a pneumatic horn as the sound source with two arrays of microphones directly across the exhaust stream. The two arrays were separated by an axial distance downstream. Exhaust centerline measurements were taken at varying engine conditions, specifically; 30%, 50%, 60%, 70%, 80% and 100% engine power. An acoustic thrust estimation showed good agreement with measured thrust during the test campaign. In addition, a full traverse of the acoustic rig through the exhaust stream was completed for the purpose of tomography reconstruction. This reconstruction technique was able to pick up key features of the flow field."]},{"key":"dc:description.abstractgeneral","label":"General Abstract","values":["A non-intrusive acoustic approach was used to measure the thrust produced by a commercial jet engine at all engine power levels. This acoustic approach was comprised of a sound source and receiving microphones placed on either side of the jet exhaust stream, just behind the engine. The acoustic measurements were compared to measurements by a load cell on the engine and showed excellent agreement. After the concept was proven, another experiment was conducted in which the sound source and microphones were moved vertically alongside the engine exhaust stream. These line of sight measurements were used to reconstruct the velocity and temperature gradients generated by the jet engine. The reconstructions showed good agreement with the engine geometry and was able to detect key flow features."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["ETD"]},{"key":"dc:title","label":"Title","values":["Turbine Engine Thrust Measurements Using a Non-Intrusive Acoustic Technique"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Ng, Wing Fai","Lowe, K. Todd"],"dc:contributor.committeemember":["Meadows, Joseph"],"dc:contributor.department":["Mechanical Engineering"],"dc:creator":["Boggs, George Lemuel IV"],"dc:date.accessioned":["2019-06-19T08:03:19Z"],"dc:date.available":["2019-06-19T08:03:19Z"],"dc:date.issued":["2019-06-18"],"dc:description.abstract":["Experiments were conducted to measure the thrust generated from a commercial jet engine. This thrust estimation was done using a pneumatic horn as the sound source with two arrays of microphones directly across the exhaust stream. The two arrays were separated by an axial distance downstream. Exhaust centerline measurements were taken at varying engine conditions, specifically; 30%, 50%, 60%, 70%, 80% and 100% engine power. An acoustic thrust estimation showed good agreement with measured thrust during the test campaign. In addition, a full traverse of the acoustic rig through the exhaust stream was completed for the purpose of tomography reconstruction. This reconstruction technique was able to pick up key features of the flow field."],"dc:description.abstractgeneral":["A non-intrusive acoustic approach was used to measure the thrust produced by a commercial jet engine at all engine power levels. This acoustic approach was comprised of a sound source and receiving microphones placed on either side of the jet exhaust stream, just behind the engine. The acoustic measurements were compared to measurements by a load cell on the engine and showed excellent agreement. After the concept was proven, another experiment was conducted in which the sound source and microphones were moved vertically alongside the engine exhaust stream. These line of sight measurements were used to reconstruct the velocity and temperature gradients generated by the jet engine. The reconstructions showed good agreement with the engine geometry and was able to detect key flow features."],"dc:description.degree":["Master of Science"],"dc:format.medium":["ETD"],"dc:identifier.other":["vt_gsexam:21015"],"dc:identifier.uri":["http://hdl.handle.net/10919/90299"],"dc:publisher":["Virginia Tech"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["acoustic","tomography","Hartmann","non-intrusive"],"dc:title":["Turbine Engine Thrust Measurements Using a Non-Intrusive Acoustic Technique"],"dc:type":["Thesis"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-07-22T22:20:02Z"}