Back to results

Virginia Polytechnic Institute and State University

The effect of forward slip on the surface finish of cold rolled aluminum

Abstract

dc:description.abstract

Forward slip (FS), the percent difference between the roll velocity and the strip exit velocity, was achieved by altering four variables: reduction, rolling speed, lubricant viscosity, and roll roughness. A two-high laboratory mill was used to roll strips of unalloyed, H-18 temper aluminum. An SEM and a Leitze Orthoplane microscope were used to examine the strip surface. A grainy pattern, which varied with the rolling condition, was observed on the sample surface. The grainy pattern resulted from three effects: grooves imprinted by the rolls, black spots identified as hydropitting (HP), and horseshoe shaped marks which were attributed to FS. These effects were studied and the following conclusions drawn. Higher viscosity, high speed, and rough rolls produced more HP. Increasing reduction produced HP with the viscous lubricant, oil, but less HP with kerosene. No HP was observed at 59 percent reduction but FS marks occurred and were more prevalent with oil than kerosene. The smooth rolls produced more FS marks than the rough rolls. Two postulates were presented to explain the pattern of these effects. First, the FS mark lengths were of the same order of magnitude as one set of theoretically calculated relative slip lengths; indicating that FS was responsible for the marks. Second, the absence of HP and presence of FS marks, in particular cases, indicated that a hydraulic effect was responsible for the FS marks. The FS marks would have been created as localized high pressure lubricant flowed across the surface to equalize the film pressure.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Mechanical Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Polytechnic Institute and State University
Year dc:date.issued
1982

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Domermuth, David Henry

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10919/87104
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/87104

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Domermuth, David Henry. The effect of forward slip on the surface finish of cold rolled aluminum. masters thesis, Virginia Polytechnic Institute and State University, 1982. http://hdl.handle.net/10919/87104