Developing and Testing a Combustor Simulator For Investigating High Pressure Turbine Aerodynamics and Heat Transfer

Within a gas turbine engine, the turbine nozzle guide vanes are subjected to very harsh conditions from the highly turbulent and hot gases exiting the combustor. The temperature and pressure fields exiting combustors are highly nonuniform and dictate the heat transfer and aero losses that occur in the turbine passages. To better understand these effects, the goal of this work was to develop an adjustable combustor exit profile simulator for the Turbine Research Facility (TRF) at the Air Force Research Laboratory. The TRF is a high temperature, high pressure, short duration blow-down test facility that is capable of matching several aerodynamic and thermal nondimensional engine parameters including Reynolds number, Mach number, pressure ratio, corrected mass flow, gas to metal temperature ratio, and corrected speed. The primary research objective was to design, install, and verify a non-reacting simulator device that can provide representative combustor exit total pressure and temperature profiles to the inlet of the TRF turbine test section. This required the upstream section of the facility to be redesigned into multiple concentric annuli that serve the purpose of injecting high momentum dilution jets and low momentum film cooling jets into a central annular chamber, similar to a turbine engine combustor. The design of the section allows for variations in injection levels to generate different pressure profiles with elevated turbulence. The dilution and film cooling temperatures can also be varied to create a variety of exit temperature profiles similar to real combustors. The impact of the generated temperature and pressure profiles on turbine heat transfer and secondary flow development was ultimately investigated. Proposed optimal inlet conditions for the turbine tested in this research effort were determined based on the measured data corresponding to the combustor simulator exit profiles that minimized vane heat transfer and total pressure loss.

Name thesis:degree_name

Ph. D.

Level thesis:degree_level

doctoral

Discipline thesis:degree_discipline

Mechanical Engineering

Department dc:contributor.department

Mechanical Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2006

Author dc:creator

• Barringer, Michael David

Chairs dc:contributor.committeechair

• Thole, Karen A.
• Polanka, Marc D.

Committee members dc:contributor.committeemember

• Diller, Thomas E.
• Ng, Wing Fai
• O'Brien, Walter F. Jr.

• Aerodynamics
• Heat--Transmission
• Gas Turbines
• Turbine Inlet Profiles
• Combustors

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Language dc:language.iso

en_US

Dc Identifier Other

etd-07242006-121819

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/79726