A method of measuring negative-phase-sequence currents in a three-phase system

A method of measuring the negative-sequence current in an unbalanced three-phase circuit. A four-winding current transformer, in conjunction with a phase shift network and an alternating current ammeter, was used for obtaining a current proportional to, and in phase with, the negative-sequence current. After calibration, readings were taken of the three line currents in a three-phase three-wire circuit and of the current in the negative-sequence ammeter. The negative-sequence current. was calculated from the line currents and compared with the ammeter reading. The difference between the two values, in most cases, was less than five per cent of the ammeter reading. It was found that. the circuit had to be calibrated for each type of ammeter used. It was concluded that direct readings of negative-sequence currents can be made with accuracy consistent with commercial requirements.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Electrical Engineering

Department dc:contributor.department

Electrical Engineering

Grantor dc:publisher

Virginia Polytechnic Institute

Year dc:date.issued

1958

Author dc:creator

• Hopkins, Mansell Herbert

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Language dc:language.iso

en_US

Handle dc:identifier.uri

http://hdl.handle.net/10919/74078

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/74078