Virginia Polytechnic Institute and State University
Pressure and velocity fields in a relaxing three-dimensional turbulent boundary layer
Abstract
dc:description.abstractStatic pressure and mean velocity data were obtained in a relaxing shear driven three-dimensional incompressible turbulent boundary layer flow produced by a swept rectangular step. The nominally 10 cm (4 in.) thick boundary layer had a freestream velocity of approximately 25 m/sec (80 ft/sec). The two steps investigated were each 3.8 cm (1.5 in.) high by 18.4 cm (7 .25 irt.) long and at angles of 30° and 45° to the transverse wind tunnel direction. Pressure gradients were determined by taking the derivative of least-squares curve fits to the static pressure data. Close to the trailing edge reattachment region, the maximum·gradient was·0.8 kPa/m (5 psf/f) for the 30° step and 0.4 kPa/m (2.5 psf/f) for the 45°step. As expected, a region of nominal pressure gradient (0.03 kPa/m or 0.2 psf/f compared to 1.6 kPa/m or 10 psf/f for a pressure driven flow) was found at greater than 36 cm (14 in.) down.stream of the trailing edge of each step. The wall crossflow angle decayed from 67° at 15 cm (6 in.) behind the trailing edge to 9° at 66 cm (26 in.) for the 30° step. In the same region, the crossflow angle decayed from 45° to 6° for the 45° step. The decay or relaxation was found to be much faster in the near-wall region and in the region close to the trailing edge. A defect in the streamwise velocity profiles indicated that the flow was dominated by the separation and reattachment over the step. For future shear driven investigations, a lower, more streamlined wing-type body is recommended to produce a moderately skewed boundary layer without dominant separation effects.
Degree
thesis:*- Name thesis:degree_name
- Master of Science
- Level thesis:degree_level
- masters
- Discipline thesis:degree_discipline
- Mechanical Engineering
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Virginia Polytechnic Institute and State University
- Year dc:date.issued
- 1979
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Nelson, Douglas J.
Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/10919/71095
- OAI identifier oai:identifier
- oai:vtechworks.lib.vt.edu:10919/71095