Back to results

Virginia Polytechnic Institute and State University

Pressure and velocity fields in a relaxing three-dimensional turbulent boundary layer

Abstract

dc:description.abstract

Static pressure and mean velocity data were obtained in a relaxing shear driven three-dimensional incompressible turbulent boundary layer flow produced by a swept rectangular step. The nominally 10 cm (4 in.) thick boundary layer had a freestream velocity of approximately 25 m/sec (80 ft/sec). The two steps investigated were each 3.8 cm (1.5 in.) high by 18.4 cm (7 .25 irt.) long and at angles of 30° and 45° to the transverse wind tunnel direction. Pressure gradients were determined by taking the derivative of least-squares curve fits to the static pressure data. Close to the trailing edge reattachment region, the maximum·gradient was·0.8 kPa/m (5 psf/f) for the 30° step and 0.4 kPa/m (2.5 psf/f) for the 45°step. As expected, a region of nominal pressure gradient (0.03 kPa/m or 0.2 psf/f compared to 1.6 kPa/m or 10 psf/f for a pressure driven flow) was found at greater than 36 cm (14 in.) down.stream of the trailing edge of each step. The wall crossflow angle decayed from 67° at 15 cm (6 in.) behind the trailing edge to 9° at 66 cm (26 in.) for the 30° step. In the same region, the crossflow angle decayed from 45° to 6° for the 45° step. The decay or relaxation was found to be much faster in the near-wall region and in the region close to the trailing edge. A defect in the streamwise velocity profiles indicated that the flow was dominated by the separation and reattachment over the step. For future shear driven investigations, a lower, more streamlined wing-type body is recommended to produce a moderately skewed boundary layer without dominant separation effects.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Mechanical Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Polytechnic Institute and State University
Year dc:date.issued
1979

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nelson, Douglas J.

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10919/71095
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/71095

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Nelson, Douglas J.. Pressure and velocity fields in a relaxing three-dimensional turbulent boundary layer. masters thesis, Virginia Polytechnic Institute and State University, 1979. http://hdl.handle.net/10919/71095