Back to results

Virginia Polytechnic Institute and State University

Phase separation spinning of porous polypropylene hollow fibers

Abstract

dc:description.abstract

Two phase separation polymer-solvent systems were studied: polypropylene-paraffin wax, and polypropylene-naphthalene. A tube-in-orifice spinneret design was used. All attempts to spin hollow fibers using the polypropyleneparaffin wax system failed. Initial attempts to produce hollow fibers from polypropylene-naphthalene solutions resulted in fiber samples with outside diameters ranging from 60 to 297 microns, and inside diameters ranging from 15 to 90 microns. However, subsequent spinning trials resulting in unpredictable solution flow behavior through the spinneret or drastic polymer degradation. A review of spinning procedures and pertinent literature led to the conclusion that chain scission of the polymer molecules was being catalyzed by contact of the polymer with certain metals (e.g. copper and iron) during solution preparation. However, with the use of a non-metallic mixing vessel and stirrer, the use of a nitrogen atmosphere, and the addition of proper stabilizers, this problem should be prevented in future studies. From observations made by optical and scanning electron microscopes, and mercury intrusion pore size distribution measurements, it was concluded that the structure of the fibers consisted of fine networks of interconnecting voids or pores. The significant majority of these pores had diameters of less than one micron. Among the suggested areas for further study in the development of hollow fibers spun from polypropylene-naphthalene solutions were spinning condition effects on pore size distribution and the possibility of using a controlled temperature liquid quench bath in the spinning process.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Chemical Engineering
Department dc:contributor.department
Chemical Engineering
Grantor dc:publisher
Virginia Polytechnic Institute and State University
Year dc:date.issued
1974

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nelson, Douglas Edmund

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10919/65051
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/65051

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Nelson, Douglas Edmund. Phase separation spinning of porous polypropylene hollow fibers. masters thesis, Virginia Polytechnic Institute and State University, 1974. http://hdl.handle.net/10919/65051