Back to results

Virginia Polytechnic Institute and State University

Structure and properties of copper oxide thin films

Abstract

dc:description.abstract

Copper oxide thin films were prepared on glass substrates by radio frequency sputtering of a sintered CuO target in various argon-oxygen atmospheres. Films sputtered in pure argon consisted of both CuO and Cu₂O due to partial dissociation of CuO during deposition. Sputtering in 10% and 50% oxygen afforded films composed entirely of CuO₁₊ₓ. All the sputtered films exhibited extrinsic p-type semiconduction. Both resistivity and thermal activation energy decreased with increasing oxygen content of the sputtering atmosphere. The resistivity of the CuO/Cu₂O films decreased with increasing Cu₂O content. Annealing of the CuO₁₊ₓfilms at 300℃ in air increased their resistivity, activation energy, and visible transmittance, while decreasing the lattice parameters slightly. These changes were attributed to the loss of excess oxygen trapped within the film lattice during sputtering. Annealing of the CuO/Cu₂O films under the same conditions oxidized the Cu₂O to CuO and increased film resistivity to values greater than 10³Ω-cm. A high degree of preferred orientation was observed in the films sputtered in the presence of oxygen. These films were oriented with the (111) planes parallel to the substrate surface and remained so even after annealing in air at 300℃. The (111) planes in CuO are composed of equal concentrations of copper and oxygen atoms and were identified as the most densely packed planes in the lattice. Films consisting of Cu₂O only were prepared by reducing previously sputtered films in a mixture of CO and CO₂ at 300℃. The technique proved to be a convenient means for obtaining Cu₂O films with reproducible properties which were useful in explaining the behavior of the CuO/Cu₂O films.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Materials Engineering
Department dc:contributor.department
Materials Engineering
Grantor dc:publisher
Virginia Polytechnic Institute and State University
Year dc:date.issued
1977

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wnuk, Andrew J.

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10919/53054
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/53054

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Wnuk, Andrew J.. Structure and properties of copper oxide thin films. masters thesis, Virginia Polytechnic Institute and State University, 1977. http://hdl.handle.net/10919/53054