{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/51916"},"canonical_url":"https://search.dev.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/51916","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Autohesion model for thermoplastic composites","abstract":"A non-isothermal autohesion model was developed by combining a transient finite element heat transfer model with the isothermal autohesion model. Heat transfer analyses and the interfacial strength development analyses were conducted using the non-isothermal autohesion model on a polysulfone (Udel P1700) compact tension specimen, a 64-ply graphic (Thomel T300)/P1700 unidirectional composite, and a 192-ply graphite (Hercules AS4)/P1700 unidirectional composite. A 64-ply T300/P1700 unidirectional composite was processed in a matched metal mold. Temperature data were taken and compared with the calculated values. Good agreement was observed between the calculated and the measured temperature values. A healing test which aimed at studying the interplay bond development in AS4/P1700 unidirectional composites was performed. The double cantilevered beam (DCD) Mode l fracture toughness test was selected. The DCB specimens were fractured and healed in a special fixture with different combinations of temperature pressure, and time. The healed DCB specimens were refractured and the critical strain energy release rates (G<sub>IC</sub>) were measured. The pressure was found to be a key factor in the healing process. Temperature and time dependencies of the interply bond development were also observed. The non-isothermal autohesion model predicted a higher strength achieved in a shorter time. This was due to the extra time which was needed for the fracture interface to achieve intimate contact, and the assumption of the initial intimate contact achievement of the non-isothermal autohesion model.","abstract_html":"A non-isothermal autohesion model was developed by combining a transient finite element heat transfer model with the isothermal autohesion model. Heat transfer analyses and the interfacial strength development analyses were conducted using the non-isothermal autohesion model on a polysulfone (Udel P1700) compact tension specimen, a 64-ply graphic (Thomel T300)/P1700 unidirectional composite, and a 192-ply graphite (Hercules AS4)/P1700 unidirectional composite. A 64-ply T300/P1700 unidirectional composite was processed in a matched metal mold. Temperature data were taken and compared with the calculated values. Good agreement was observed between the calculated and the measured temperature values. A healing test which aimed at studying the interplay bond development in AS4/P1700 unidirectional composites was performed. The double cantilevered beam (DCD) Mode l fracture toughness test was selected. The DCB specimens were fractured and healed in a special fixture with different combinations of temperature pressure, and time. The healed DCB specimens were refractured and the critical strain energy release rates (G&lt;sub&gt;IC&lt;/sub&gt;) were measured. The pressure was found to be a key factor in the healing process. Temperature and time dependencies of the interply bond development were also observed. The non-isothermal autohesion model predicted a higher strength achieved in a shorter time. This was due to the extra time which was needed for the fracture interface to achieve intimate contact, and the assumption of the initial intimate contact achievement of the non-isothermal autohesion model.","abstract_has_math":false,"creators":["Li, Min-Chung"],"institution":"Virginia Polytechnic Institute and State University","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Engineering Mechanics","degree_department":"Engineering Mechanics","school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1989,"date_issued":"1989","date_published":"1989","updated_at":"2026-07-22T22:20:05Z","subjects":[],"languages":["en_US"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/51916","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.department","label":"Department","values":["Engineering Mechanics"]},{"key":"dc:creator","label":"Author","values":["Li, Min-Chung"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2015-04-29T18:10:16Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2015-04-29T18:10:16Z"]},{"key":"dc:date.issued","label":"Date","values":["1989"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Polytechnic Institute and State University"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Engineering Mechanics"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/51916"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["A non-isothermal autohesion model was developed by combining a transient finite element heat transfer model with the isothermal autohesion model. Heat transfer analyses and the interfacial strength development analyses were conducted using the non-isothermal autohesion model on a polysulfone (Udel P1700) compact tension specimen, a 64-ply graphic (Thomel T300)/P1700 unidirectional composite, and a 192-ply graphite (Hercules AS4)/P1700 unidirectional composite. A 64-ply T300/P1700 unidirectional composite was processed in a matched metal mold. Temperature data were taken and compared with the calculated values. Good agreement was observed between the calculated and the measured temperature values. A healing test which aimed at studying the interplay bond development in AS4/P1700 unidirectional composites was performed. The double cantilevered beam (DCD) Mode l fracture toughness test was selected. The DCB specimens were fractured and healed in a special fixture with different combinations of temperature pressure, and time. The healed DCB specimens were refractured and the critical strain energy release rates (G<sub>IC</sub>) were measured. The pressure was found to be a key factor in the healing process. Temperature and time dependencies of the interply bond development were also observed. The non-isothermal autohesion model predicted a higher strength achieved in a shorter time. This was due to the extra time which was needed for the fracture interface to achieve intimate contact, and the assumption of the initial intimate contact achievement of the non-isothermal autohesion model."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Autohesion model for thermoplastic composites"]}]}],"canonical_facts":{"dc:contributor.department":["Engineering Mechanics"],"dc:creator":["Li, Min-Chung"],"dc:date.accessioned":["2015-04-29T18:10:16Z"],"dc:date.available":["2015-04-29T18:10:16Z"],"dc:date.issued":["1989"],"dc:description.abstract":["A non-isothermal autohesion model was developed by combining a transient finite element heat transfer model with the isothermal autohesion model. Heat transfer analyses and the interfacial strength development analyses were conducted using the non-isothermal autohesion model on a polysulfone (Udel P1700) compact tension specimen, a 64-ply graphic (Thomel T300)/P1700 unidirectional composite, and a 192-ply graphite (Hercules AS4)/P1700 unidirectional composite. A 64-ply T300/P1700 unidirectional composite was processed in a matched metal mold. Temperature data were taken and compared with the calculated values. Good agreement was observed between the calculated and the measured temperature values. A healing test which aimed at studying the interplay bond development in AS4/P1700 unidirectional composites was performed. The double cantilevered beam (DCD) Mode l fracture toughness test was selected. The DCB specimens were fractured and healed in a special fixture with different combinations of temperature pressure, and time. The healed DCB specimens were refractured and the critical strain energy release rates (G<sub>IC</sub>) were measured. The pressure was found to be a key factor in the healing process. Temperature and time dependencies of the interply bond development were also observed. The non-isothermal autohesion model predicted a higher strength achieved in a shorter time. This was due to the extra time which was needed for the fracture interface to achieve intimate contact, and the assumption of the initial intimate contact achievement of the non-isothermal autohesion model."],"dc:description.degree":["Master of Science"],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/10919/51916"],"dc:language.iso":["en_US"],"dc:publisher":["Virginia Polytechnic Institute and State University"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:title":["Autohesion model for thermoplastic composites"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Engineering Mechanics"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-07-22T22:20:05Z"}