Characterization and modeling of magnetic materials and structures

This dissertation presents methods for wideband characterization and modeling of magnetic materials and structures over a wide frequency range (dc to a few GHz). A method for modeling the thick film inductor structures at high frequencies is presented in this dissertation. The thick film inductor under test is printed and located in shunt connection at the end of a reference transmission line. Time Domain Reflectometry (TDR) technique is used to measure the response waveform from the inductor under test. The response from a short circuit at the location of the inductor is acquired as the reference waveform. The two acquired waveforms are then transformed into the frequency domain using the Fast Fourier Transform algorithm (FFT). The reflection coefficient is then computed as the ratio between the Fourier Transforms of the response and reference waveforms. From the information contained, the complex impedance of the structure under study can be calculated. This information is used for modeling that structure by fitting the data to the network model using the computer network analysis program. Experimental and simulated response waveforms are compared and brought to a close match by changing the model components values. A cavity-like sample holder filled with ferrite material ls proposed in this dissertation to measure the complex permeability of the magnetic material filling this cavity. The cavity walls are deposited on a coaxially shaped sample using thick film techniques. The reflection coefficient from the cavity under study is measured by adapting the cavity to the end of a transmission line. The full field analysis of this proposed configuration is used to determine a relationship between the complex permeability of the ferrite material and the measured reflection coefficient. The method of moments ls used to achieve this task. Computer simulation experiments are performed to test the sensitivity of the technique and to predict the performance over the desired frequency range. Actual experimentation as well as verifications of these measurements are conducted to verify the merit of the proposed technique.

Name thesis:degree_name

Ph. D.

Level thesis:degree_level

doctoral

Discipline thesis:degree_discipline

Electrical Engineering

Department dc:contributor.department

Electrical Engineering

Grantor dc:publisher

Virginia Polytechnic Institute and State University

Year dc:date.issued

1988

Author dc:creator

• Al-Mazroo, Abdulhameed Yousef

Chair dc:contributor.committeechair

• Elshabini-Riad, Aicha A.

Committee members dc:contributor.committeemember

• Besieris, Ioannis M.
• Kohler, Werner
• Riad, Sedki
• Vorperian, Vatche

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Handle dc:identifier.uri

http://hdl.handle.net/10919/49915

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/49915