Back to results

Virginia Tech

The development of the peninsula blister fracture test for adhesively bonded joints

Abstract

dc:description.abstract

This study reports on the development and application of the peninsula blister test to quantitatively measure the adhesion of various adhesively bonded joints. Analytical results reveal that this peninsula-like geometry benefits from both a constant strain energy release rate over the major portion of the debond length and a high strain energy release rate at any given pressure. Applications of this technique to several adhesion systems were conducted. Although some of these systems haven't been successfully tested due to various reasons, experimental results from systems of PSA tapes and thin polyimide films bonded on aluminum substrates were promising. The agreement of the bond strength in terms of strain energy release rates obtained from both experimental and analytical methods from the last two systems indicates the feasibility of this technique. Primary studies on the stress analysis for several thin film adhesion tests suggest that the high ratio of strain energy release rate to applied pressure offered by this modified blister geometry may not be able to overcome the tensile strength limitations of thin film adhesion testing. Further studies need to be conducted in order to understand if the strain energy release rate can be raised without the increase of membrane stresses by altering specimen geometries. In conclusion, although this modified blister is not an universal adhesion test for every adhesion system, the attractive nature of the constant strain energy release rate produced by the peninsula blister specimen warrants further investigations and wider applications.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Engineering Mechanics
Department dc:contributor.department
Engineering Mechanics
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
1992

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bao, Yong
Chair dc:contributor.committeechair
  • Dillard, David A.
Committee members dc:contributor.committeemember
  • Griffin, Odis Hayden Jr.
  • Wightman, James P.

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
etd-09052009-040525
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/44566

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Bao, Yong. The development of the peninsula blister fracture test for adhesively bonded joints. masters thesis, Virginia Tech, 1992. http://hdl.handle.net/10919/44566