{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/44558"},"canonical_url":"https://search.dev.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/44558","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Tip leakage loss development in a linear turbine cascade","abstract":"Tip leakage losses were studied in a linear turbine cascade with a tip clearance gap equal to 2.1 percent of blade height. The blades of the cascade have a turning angle of 109.4 degrees, an aspect ratio of 1.0, and an axial chord length of 235.2 mm. The cascade was located at the exit of a low speed wind tunnel; the blade exit Reynolds number based upon blade axial chord was 4.5x10⁵. The flow was measured at a plane 0.96 axial chords downstream from the blade leading edge. Barlier studies performed at the tip gap exit and at a downstream plane 1.4 axial chords from the blade leading edge were utilized with the present study to understand loss development better. The effect of tip leakage and the corresponding loss production mechanisms involved as the flow mixes out were analyzed. As part of the objective of the study, a computerized data acquisition system was developed which acquires pressure data and controls movement of a five hole pressure probe. The flow properties at the measurement plane were numerically integrated. To estimate the maximum potential loss of the cascade, the flow was mixed-out through a momentum analysis. The loss at the measurement plane due to tip leakage was found to be equal to the sum of the total pressure loss within the tip gap and the dissipated tip gap secondary kinetic energy. As the flow proceeded downstream, losses were attributed to dissipation of secondary kinetic energy, trailing edge wake mixing, endwall losses, and primary flow mixing.","abstract_html":"Tip leakage losses were studied in a linear turbine cascade with a tip clearance gap equal to 2.1 percent of blade height. The blades of the cascade have a turning angle of 109.4 degrees, an aspect ratio of 1.0, and an axial chord length of 235.2 mm. The cascade was located at the exit of a low speed wind tunnel; the blade exit Reynolds number based upon blade axial chord was 4.5x10⁵. The flow was measured at a plane 0.96 axial chords downstream from the blade leading edge. Barlier studies performed at the tip gap exit and at a downstream plane 1.4 axial chords from the blade leading edge were utilized with the present study to understand loss development better. The effect of tip leakage and the corresponding loss production mechanisms involved as the flow mixes out were analyzed. As part of the objective of the study, a computerized data acquisition system was developed which acquires pressure data and controls movement of a five hole pressure probe. The flow properties at the measurement plane were numerically integrated. To estimate the maximum potential loss of the cascade, the flow was mixed-out through a momentum analysis. The loss at the measurement plane due to tip leakage was found to be equal to the sum of the total pressure loss within the tip gap and the dissipated tip gap secondary kinetic energy. As the flow proceeded downstream, losses were attributed to dissipation of secondary kinetic energy, trailing edge wake mixing, endwall losses, and primary flow mixing.","abstract_has_math":false,"creators":["Peters, David W."],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Mechanical Engineering","degree_department":"Mechanical Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1992,"date_issued":"1992","date_published":"1992","updated_at":"2026-07-22T22:20:05Z","subjects":[],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-09052009-040444"],"render_values":[{"text":"etd-09052009-040444","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/10919/44558","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.department","label":"Department","values":["Mechanical Engineering"]},{"key":"dc:creator","label":"Author","values":["Peters, David W."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:44:33Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:44:33Z","2009-09-05"]},{"key":"dc:date.issued","label":"Date","values":["1992"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-09052009-040444"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/44558"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Tip leakage losses were studied in a linear turbine cascade with a tip clearance gap equal to 2.1 percent of blade height. The blades of the cascade have a turning angle of 109.4 degrees, an aspect ratio of 1.0, and an axial chord length of 235.2 mm. The cascade was located at the exit of a low speed wind tunnel; the blade exit Reynolds number based upon blade axial chord was 4.5x10⁵. The flow was measured at a plane 0.96 axial chords downstream from the blade leading edge. Barlier studies performed at the tip gap exit and at a downstream plane 1.4 axial chords from the blade leading edge were utilized with the present study to understand loss development better. The effect of tip leakage and the corresponding loss production mechanisms involved as the flow mixes out were analyzed. As part of the objective of the study, a computerized data acquisition system was developed which acquires pressure data and controls movement of a five hole pressure probe. The flow properties at the measurement plane were numerically integrated. To estimate the maximum potential loss of the cascade, the flow was mixed-out through a momentum analysis. The loss at the measurement plane due to tip leakage was found to be equal to the sum of the total pressure loss within the tip gap and the dissipated tip gap secondary kinetic energy. As the flow proceeded downstream, losses were attributed to dissipation of secondary kinetic energy, trailing edge wake mixing, endwall losses, and primary flow mixing."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Tip leakage loss development in a linear turbine cascade"]}]}],"canonical_facts":{"dc:contributor.department":["Mechanical Engineering"],"dc:creator":["Peters, David W."],"dc:date.accessioned":["2014-03-14T21:44:33Z"],"dc:date.available":["2014-03-14T21:44:33Z","2009-09-05"],"dc:date.issued":["1992"],"dc:description.abstract":["Tip leakage losses were studied in a linear turbine cascade with a tip clearance gap equal to 2.1 percent of blade height. The blades of the cascade have a turning angle of 109.4 degrees, an aspect ratio of 1.0, and an axial chord length of 235.2 mm. The cascade was located at the exit of a low speed wind tunnel; the blade exit Reynolds number based upon blade axial chord was 4.5x10⁵. The flow was measured at a plane 0.96 axial chords downstream from the blade leading edge. Barlier studies performed at the tip gap exit and at a downstream plane 1.4 axial chords from the blade leading edge were utilized with the present study to understand loss development better. The effect of tip leakage and the corresponding loss production mechanisms involved as the flow mixes out were analyzed. As part of the objective of the study, a computerized data acquisition system was developed which acquires pressure data and controls movement of a five hole pressure probe. The flow properties at the measurement plane were numerically integrated. To estimate the maximum potential loss of the cascade, the flow was mixed-out through a momentum analysis. The loss at the measurement plane due to tip leakage was found to be equal to the sum of the total pressure loss within the tip gap and the dissipated tip gap secondary kinetic energy. As the flow proceeded downstream, losses were attributed to dissipation of secondary kinetic energy, trailing edge wake mixing, endwall losses, and primary flow mixing."],"dc:description.degree":["Master of Science"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-09052009-040444"],"dc:identifier.uri":["http://hdl.handle.net/10919/44558"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:title":["Tip leakage loss development in a linear turbine cascade"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-07-22T22:20:05Z"}