Back to results

Virginia Tech

Interfacial structure of delta phase in Inconel 718 and the selection of precipitate habit planes

Abstract

dc:description.abstract

We investigated the structure and defects associated with interphase boundaries between a γ (fcc) matrix and plate-shaped precipitates of the δ (orthorhombic) phase in Inconel 718. Based upon transmission electron microscopy (TEM) observations, the average habit plane was confirmed to be (111)<sub>γ</sub> which is consistent with previous reports. A parallel array of misfit dislocations with Burgers vector b=1/6[112̅]<sub>γ</sub>, (designated M1) are always observed lying along the [11̅0] direction. Another array of misfit dislocations appears in some regions of the interface with Burgers vector b=1/6[21̅1̅]<sub>γ</sub> (designated M2). These dislocations also lie along the [11̅0] direction. Irregular ledges were identified on the interface and are believed to contribute to the thickening of δ plates. Dislocations in the matrix were also characterized. Most matrix dislocations have a 1/2[1̅01]<sub>γ</sub> Burgers vector. The growth ledges in the habit plane of a single δ plate have a variety of effective Burgers vectors. A geometric matching approach based upon near-coincident sites was employed to explain the interfaces structure of interphase boundaries in Inconel 718, as well as fdc/bcc in Ni-45wt% Cr. In both cases, the conjugate plane is the plane with the highest areal density of near-coincident sites over a small region while the average habit plane is determined by the continuity of near-coincidence sites over a large area. The M1 interfacial dislocations in the γ/δ interface accommodate misfit in the habit plane whereas M2 dislocations do not and are probably a by-product of the dissociation of matrix dislocations. In the fcc/bcc system, the habit plane is not parallel to the conjugate plane and the partial dislocations associated with matrix stacking faults improve matching in the habit plane even though their Burgers vector lies out of this plane.

Degree

thesis:*
Name thesis:degree_name
Ph. D.
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering Science
Department dc:contributor.department
Materials Engineering Science
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
1996

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Liang, Qiang
Chair dc:contributor.committeechair
  • Reynolds, William T. Jr.
Committee members dc:contributor.committeemember
  • Farkas, Diana
  • Desu, Seshu B.
  • Curtin, W. A. Jr.
  • Kampe, Stephen L.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
etd-05112006-154827
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/37775

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Liang, Qiang. Interfacial structure of delta phase in Inconel 718 and the selection of precipitate habit planes. doctoral thesis, Virginia Tech, 1996. http://hdl.handle.net/10919/37775