Back to results

Virginia Tech

Strength Calculation Model for Standoff Screws in Composite Joists

Abstract

dc:description.abstract

The objective of the research reported herein is to present a comprehensive evaluation of all available experimental data from push-out tests utilizing the ELCO Grade 8 standoff screws. The goal is to develop a strength prediction equation and determine reliability parameters compatible with the Load Factor Resistance Design (LRFD) procedure that would allow the use of this shear connector in design of composite floor systems. The study considers results from push-out tests using this type of screw reported by Hankins et al. (1994), Alander et al. (1998), Webler et al. (2000), and Mujagic et al. (2000). Further, this study identifies the limitations in earlier approaches aimed at predicting the strength of standoff screws. An improved strength prediction model is developed that considers all applicable limit states and determines maximum strength of a connector. A reliability study was also conducted to derive strength reduction factors to be used in design. Parameters considered in the model include deck type and geometry, screw height, concrete compressive strength, top chord angle yield strength, and stand-off screw rupture strength. Results from strength prediction model were compared with results from composite joist tests.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Civil Engineering
Department dc:contributor.department
Civil Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mujagic, Ubejd
Chair dc:contributor.committeechair
  • Easterling, William Samuel
Committee members dc:contributor.committeemember
  • Roberts-Wollmann, Carin L.
  • Murray, Thomas M.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
etd-12052000-153736
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/35960

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Mujagic, Ubejd. Strength Calculation Model for Standoff Screws in Composite Joists. masters thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/35960