Cleaning and Dewatering Fine Coal using Hydrophobic Displacement

A new processing technique, known as hydrophobic displacement, was explored as a means of simultaneously removing both mineral matter and surface moisture from coal in a single process. Previous thermodynamic analysis suggests that coal moisture will be spontaneously displaced by any oil with a contact angle greater than ninety degrees in water. Based on these results, six methods of hydrophobic displacement were evaluated: hand shaking, screening, air classification, centrifugation, filtration, and displacement. In the first five methods hydrophobic displacement took place during the cleaning stage. A recyclable non-polar liquid (i.e. pentane) was used to agglomerate coal fines followed by a physical separation step to remove the coal agglomerates from the mineral-laden slurry. Bench-scale tests were performed to identify the conditions required to create stable agglomerates. Only the last method, displacement, did not utilized agglomeration and performed hydrophobic displacement during dewatering, not cleaning. A procedure was also developed for determining moisture content from evaporation curves so that the contents of water and pentane remaining in a sample could be accurately distinguished. Two primary coal samples were evaluated in the test program, i.e., dry pulverized 80 mesh x 0 clean coal and 100 mesh x 0 flotation feed. These samples were further screened or aged (oxidized) to provide additional test samples. The lowest moisture, 7.5%, was achieved with centrifugation of the pulverized 80 mesh x 0 clean coal sample. Centrifugation provided the most reliable separation method since it consistently produced low moisture, high combustible recoveries, and high ash rejections. Hand shaking produced the next lowest moisture at 16.2%; however, the low moistures were associated with a drop in combustible recovery. There was also a great deal of error in this process due to its arbitrary nature. Factors such as oxidation, size distribution, and contact angle hysteresis influenced the concentrate moistures, regardless of the method utilized.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Mining and Minerals Engineering

Department dc:contributor.department

Mining and Minerals Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2008

Author dc:creator

• Smith, Kara E.

Chairs dc:contributor.committeechair

• Luttrell, Gerald H.
• Yoon, Roe-Hoan

Committee member dc:contributor.committeemember

• Adel, Gregory T.

• hydrophobic displacement
• coal dewatering
• selective agglomeration

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

etd-06042008-073317

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/33416