Back to results

Virginia Tech

Modeling Manganese Sorption and Surface Oxidation During Filtration

Abstract

dc:description.abstract

Soluble manganese (Mn) is a common contaminant in drinking water sources. High levels of Mn can lead to aesthetic water quality problems, necessitating removal of Mn during treatment to minimize consumer complaints. Mn may be removed during granular media filtration by the "natural greensand effect," in which soluble Mn adsorbs to manganese oxide-coated (MnOx(s)) media and is then oxidized by chlorine, forming more manganese oxide. This research builds on a previous model developed by Merkle et al. (1997) by either neglecting the empirically determined available fraction of sorption sites (referred to as the "simple" model), which took into account the fact that some adsorption sites in the porous media were inaccessible, or by explicitly accounting for the transport and reaction processes within the porous structure of the MnOx(s) coating (referred to as the "mechanistic" model). Both models were applied to experimental data and used to evaluate the oxidation rate constant, which was the only unknown parameter. An inverse relationship between the fitted reaction rate constant and chlorine concentration was observed, showing that the oxidation reaction does not depend on chlorine concentration for the experimental conditions considered. In a sensitivity analysis, the adsorption isotherm and reaction rate were found to have the greatest impact on predicted Mn removal. The simple model should prove useful for designing contactor units for manganese removal, provided its limitations are clearly understood, while the mechanistic model should be able to resolve differences in the various types of oxide coating (internal porosity, surface area and coating thickness) and will allow a more fundamental and mechanistically-consistent evaluation of the appropriate form of the oxidation rate expression. However, further research is needed to more completely characterize the adsorption and reaction mechanisms over the range of conditions commonly encountered in water treatment plants.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Environmental Planning
Department dc:contributor.department
Environmental Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bierlein, Kevin Andrew
Chair dc:contributor.committeechair
  • Little, John C.
Committee members dc:contributor.committeemember
  • Knocke, William R.
  • Tobiason, John E.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
etd-05032012-122257
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/32164

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Bierlein, Kevin Andrew. Modeling Manganese Sorption and Surface Oxidation During Filtration. masters thesis, Virginia Tech, 2012. http://hdl.handle.net/10919/32164