Reduction of Unsteady Stator-Rotor Interaction by Trailing Edge Blowing Using MEMS Based Microvalves

This research performs an experimental study of a trailing edge blowing system that can adapt to variations in flow parameters and reduce the unsteady stator-rotor interaction at all engine operating conditions. The fan rotor of a 1/14 scale turbofan propulsion simulator is subjected to spatially periodic, circumferential inlet flow distortions. The distortions are generated by four struts that support a centerbody in the inlet mounted onto the simulator. To reduce the unsteady effects of the strut wakes on the rotor blades, the wake is re-energized by injecting mass from the trailing edge of the strut. Each strut is provided with discrete blowing holes that open out through the strut trailing edge. Each blowing hole is connected to a MEMS based microvalve, which controls the blowing rate of the hole. The microvalve is actuated by a signal voltage, generated by a PID controller that accepts free stream and wake axial flow velocities as inputs and minimizes their difference. To quantify the effectiveness of trailing edge blowing the far-field noise is measured in an anechoic chamber. The experiments are performed for two simulator test speeds, 29,500 rpm and 40,000 rpm, with and without trailing edge blowing. The maximum reduction recorded at 29,500 rpm is 8.2 dB, and at 40,000 rpm is 7.3 dB. Reductions of 2.9 dB and greater are observed at the first five harmonics of the blade passing frequency. The sound power level at the blade passing frequency, calculated from measured far-field directivity, is reduced by 4.4 dB at 29,500 rpm and by 2.9 dB at 40,000 rpm. The feasibility and advantage of active control is demonstrated by the ability of the system to respond to a step change in the inlet flow velocity, and achieve optimum wake filling in approximately 8 seconds.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Mechanical Engineering

Department dc:contributor.department

Mechanical Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

1999

Author dc:creator

• Rao, Nikhil M.

Chair dc:contributor.committeechair

• Ng, Wing Fai

Committee members dc:contributor.committeemember

• Burdisso, Ricardo A.
• Dancey, Clinton L.

• Trailing Edge Blowing
• Noise
• Aeroacoustics
• Turbomachinery
• MEMS.

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

etd-042399-125728

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/31854