Reduction of Unsteady Rotor-Stator Interaction Using Trailing Edge Blowing

An aeroacoustic investigation was performed to assess the effects of adding mass flow at the trailing edges of four stators upstream of an aircraft engine simulator. By using trailing edge blowing to minimize the shed wakes of the stators, the flow into the rotor was made more uniform. In these experiments a reduced number of stators (four) was used in a 1/14 scale model inlet which was coupled to a 4.1 in (10.4 cm) turbofan engine simulator with 18 rotors and 26 downstream stators. This study is a preliminary step toward a more in depth investigation of using trailing edge blowing to reduce unsteady rotor-stator interaction. Steady-state measurements of the aerodynamic flow field and acoustic far field were made in order to evaluate the aeroacoustic performance at three simulator speeds: 40%, 60%, and 88% of the design speed. The lowest test speed of 40% design speed showed the most dramatic reduction in radiated noise. Noise reductions as large as 8.9 dB in the blade passing tone were recorded at 40% design speed, while a tone reduction of 5.5 dB was recorded at 60% design speed. At 88% design speed a maximum tone reduction of 2.6 dB was recorded. In addition, trailing edge blowing reduced the overall sound pressure level in every case. For both the 40% design speed and the 60% design speed, the fan face distortion was significantly reduced due to the trailing edge blowing. The addition of trailing edge blowing from the four upstream stators did not change the total pressure ratio, and the mass flow added by the blowing was approximately 1%. The results of these experiments clearly demonstrate that blowing from the trailing edges of the stators is effective in reducing unsteady rotor-stator interaction and the subsequent forward radiated noise.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Mechanical Engineering

Department dc:contributor.department

Mechanical Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

1997

Author dc:creator

• Leitch, Thomas A.

Chair dc:contributor.committeechair

• Ng, Wing Fai

Committee members dc:contributor.committeemember

• Burdisso, Ricardo A.
• Dancey, Clinton L.

• Trailing Edge Blowing
• Aeroacoustic
• Noise
• Turbomachinery

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

etd-4241161974360

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/30527