Abstract
dc:description.abstractCatalysts consisting of silver on α-Al₂O₃, α-SiC, and β-SiC supports were synthesized and tested for catalytic performance in the gas-phase direct oxidation of ethylene to ethylene oxide. For this study, which used no promoters, ethylene oxidation selectivity of SiC-supported catalysts ranged from 10 to 60% and conversion from 0-4.5%. Silicon carbide supported catalysts exhibited poor performance except for a surface-modified β-SiC-supported catalyst, which demonstrated conversion and selectivity similar to that of an α-Al₂O₃-supported catalyst. This Ag/β-SiC catalyst was further investigated with a kinetic study, and the reaction orders were found to be 0.18 with respect to ethylene and 0.34 with respect to oxygen. The kinetic results were consistent with Langmuir-Hinshelwood rate expressions developed from single-site and dual-site reaction mechanisms. Gold nanoparticles on titanium oxide and titania-silica supports are active for the formation of propylene oxide by the oxidation of propylene with hydrogen and oxygen mixtures. This study investigates the effect of cyanide treatment on gold supported on titanosilicate zeolite supports (Au/TS-1). Catalysts treated with weak solutions of sodium cyanide resulted in preferential removal of small gold particles, while catalysts treated with strong solutions resulted in dissolution of the gold and re-precipitation as gold (+1) cyanide. X-ray absorption spectroscopy demonstrated that catalysts which produce propylene oxide in the presence of hydrogen and oxygen mixtures had supported gold (+3) oxide nanoparticles of 3 nm size after synthesis, which were reduced to gold metal at reaction conditions. Samples treated with strong solutions of sodium cyanide resulted in supported gold (+1) cyanide particles of large size, 9-11 nm. These particles did not produce propylene oxide but, surprisingly, showed high selectivity toward propylene hydrogenation. Increasing gold (+1) cyanide particle size resulted in a decrease in hydrogenation activity. TS-1 and Au/TS-1 surfaces were studied with laser Raman spectroscopy. Surface fluorescence was substantially reduced with a low-temperature ozone treatment, allowing observation of titanosilicate framework bands. Hydrocarbon vibrations are observed for TS-1 and Au/TS-1 under propylene. Density functional theory models indicated that propylene adsorbed to a metal site along the Ï bond would show a Raman spectrum very similar to gas-phase propylene except for out-of-plane C-H vibrations, which would be moved to higher energy. This adsorption spectrum, with out-of-plane vibrations shifted to higher energy, was observed for both TS-1 and Au/TS-1. Langmuir adsorption isotherms were generated for both TS-1 and Au/TS-1, and a scaling factor derived from propylene uptake experiments allowed these isotherms to be scaled to propylene coverage of titanium.
Degree
thesis:*- Name thesis:degree_name
- Ph. D.
- Level thesis:degree_level
- doctoral
- Discipline thesis:degree_discipline
- Chemical Engineering
- Department dc:contributor.department
- Chemical Engineering
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2010
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Gaudet, Jason
- Chair dc:contributor.committeechair
-
- Oyama, Shigeo Ted
- Committee members dc:contributor.committeemember
-
- Hanson, Brian E.
- Cox, David F.
- Davis, Richey M.
Subjects
dc:subject × 13Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
Identifiers
dc:identifier.*- Dc Identifier Other
- etd-10222010-115835
- OAI identifier oai:identifier
- oai:vtechworks.lib.vt.edu:10919/29341