{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/28507"},"canonical_url":"https://search.dev.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/28507","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Electropolishing of Niobium in Sulfuric Acid-Methanol Electrolytes: Development of Hydrofluoric Acid-Free Electrolytes","abstract":"Niobium (Nb) has the highest superconducting transition temperature (9.2 K) of the pure metals, which makes it the most used material for the construction of superconducting radio frequency (SRF) accelerators. The performance of the accelerator is critically dependent upon the quality of Nb surface. Electropolishing (EP) in hydrofluoric acid (HF)-containing electrolytes is the currently accepted treatment process. The presence of HF is necessary for the removal of the passive oxide surface film formed in aqueous electrolytes. But HF is hazardous and must be contained without human exposure and eliminated in an environmentally appropriate manner. In the present dissertation project, HF-Free EP of Nb was performed in sulfuric acid-methanol electrolytes. Sulfuric concentrations of 0.1 M, 0.5 M, 1 M, 2 M, and 3 M were used. Cyclic voltammetry and potential hold experiments were performed in cells of both two-electrode and three-electrode setups to evaluate the electrochemical process. The influence of electrolyte concentration, temperature, and EP duration was investigated. At room temperature, both the corrosion rate and the surface quality obtained were comparable to those currently obtained with HF-based processing. With decreasing temperature, the mean current level decreased and the surface quality improved substantially. For a desired average material removal of 100 μM, nanometer scale surface roughness was obtained under multiple conditions. Mechanism of EP was also investigated by electrochemical impedance spectroscopy (EIS). The EIS diagram indicates the presence of a compact film during EP at mass transport controlled limiting current and a film-free surface during EP at ohmic controlled current. Transfer from a film-free surface to an anodic film precipitation with decreasing temperature was also observed. Microsmoothing is only achieved under mass transport control. Nb⁵⁺ ions are determined to be the mass transport limiting species.","abstract_html":"Niobium (Nb) has the highest superconducting transition temperature (9.2 K) of the pure metals, which makes it the most used material for the construction of superconducting radio frequency (SRF) accelerators. The performance of the accelerator is critically dependent upon the quality of Nb surface. Electropolishing (EP) in hydrofluoric acid (HF)-containing electrolytes is the currently accepted treatment process. The presence of HF is necessary for the removal of the passive oxide surface film formed in aqueous electrolytes. But HF is hazardous and must be contained without human exposure and eliminated in an environmentally appropriate manner. In the present dissertation project, HF-Free EP of Nb was performed in sulfuric acid-methanol electrolytes. Sulfuric concentrations of 0.1 M, 0.5 M, 1 M, 2 M, and 3 M were used. Cyclic voltammetry and potential hold experiments were performed in cells of both two-electrode and three-electrode setups to evaluate the electrochemical process. The influence of electrolyte concentration, temperature, and EP duration was investigated. At room temperature, both the corrosion rate and the surface quality obtained were comparable to those currently obtained with HF-based processing. With decreasing temperature, the mean current level decreased and the surface quality improved substantially. For a desired average material removal of 100 μM, nanometer scale surface roughness was obtained under multiple conditions. Mechanism of EP was also investigated by electrochemical impedance spectroscopy (EIS). The EIS diagram indicates the presence of a compact film during EP at mass transport controlled limiting current and a film-free surface during EP at ohmic controlled current. Transfer from a film-free surface to an anodic film precipitation with decreasing temperature was also observed. Microsmoothing is only achieved under mass transport control. Nb⁵⁺ ions are determined to be the mass transport limiting species.","abstract_has_math":false,"creators":["Zhao, Xin"],"institution":"Virginia Tech","degree_name":"Ph. D.","degree_level":"doctoral","degree_discipline":"Materials Science and Engineering","degree_department":"Materials Science and Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Corcoran, Sean G.","Kelley, Michael J."],"committee_members":["Edwards, Marc A.","Aning, Alexander O.","Reynolds, William T. Jr."],"year":2009,"date_issued":"2009-07-16","date_published":"2009-07-16","updated_at":"2026-07-22T22:20:00Z","subjects":["sulfuric acid-methanol","niobium","electropolishing","hydrofluoric acid-free"],"languages":[],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-08032009-170244"],"render_values":[{"text":"etd-08032009-170244","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/10919/28507","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Corcoran, Sean G.","Kelley, Michael J."]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Edwards, Marc A.","Aning, Alexander O.","Reynolds, William T. Jr."]},{"key":"dc:contributor.department","label":"Department","values":["Materials Science and Engineering"]},{"key":"dc:creator","label":"Author","values":["Zhao, Xin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T20:14:42Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T20:14:42Z","2010-10-22"]},{"key":"dc:date.issued","label":"Date","values":["2009-07-16"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Materials Science and Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["doctoral"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["sulfuric acid-methanol","niobium","electropolishing","hydrofluoric acid-free"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-08032009-170244"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/28507"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Niobium (Nb) has the highest superconducting transition temperature (9.2 K) of the pure metals, which makes it the most used material for the construction of superconducting radio frequency (SRF) accelerators. The performance of the accelerator is critically dependent upon the quality of Nb surface. Electropolishing (EP) in hydrofluoric acid (HF)-containing electrolytes is the currently accepted treatment process. The presence of HF is necessary for the removal of the passive oxide surface film formed in aqueous electrolytes. But HF is hazardous and must be contained without human exposure and eliminated in an environmentally appropriate manner. In the present dissertation project, HF-Free EP of Nb was performed in sulfuric acid-methanol electrolytes. Sulfuric concentrations of 0.1 M, 0.5 M, 1 M, 2 M, and 3 M were used. Cyclic voltammetry and potential hold experiments were performed in cells of both two-electrode and three-electrode setups to evaluate the electrochemical process. The influence of electrolyte concentration, temperature, and EP duration was investigated. At room temperature, both the corrosion rate and the surface quality obtained were comparable to those currently obtained with HF-based processing. With decreasing temperature, the mean current level decreased and the surface quality improved substantially. For a desired average material removal of 100 μM, nanometer scale surface roughness was obtained under multiple conditions. Mechanism of EP was also investigated by electrochemical impedance spectroscopy (EIS). The EIS diagram indicates the presence of a compact film during EP at mass transport controlled limiting current and a film-free surface during EP at ohmic controlled current. Transfer from a film-free surface to an anodic film precipitation with decreasing temperature was also observed. Microsmoothing is only achieved under mass transport control. Nb⁵⁺ ions are determined to be the mass transport limiting species."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph. D."]},{"key":"dc:title","label":"Title","values":["Electropolishing of Niobium in Sulfuric Acid-Methanol Electrolytes: Development of Hydrofluoric Acid-Free Electrolytes"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Corcoran, Sean G.","Kelley, Michael J."],"dc:contributor.committeemember":["Edwards, Marc A.","Aning, Alexander O.","Reynolds, William T. Jr."],"dc:contributor.department":["Materials Science and Engineering"],"dc:creator":["Zhao, Xin"],"dc:date.accessioned":["2014-03-14T20:14:42Z"],"dc:date.available":["2014-03-14T20:14:42Z","2010-10-22"],"dc:date.issued":["2009-07-16"],"dc:description.abstract":["Niobium (Nb) has the highest superconducting transition temperature (9.2 K) of the pure metals, which makes it the most used material for the construction of superconducting radio frequency (SRF) accelerators. The performance of the accelerator is critically dependent upon the quality of Nb surface. Electropolishing (EP) in hydrofluoric acid (HF)-containing electrolytes is the currently accepted treatment process. The presence of HF is necessary for the removal of the passive oxide surface film formed in aqueous electrolytes. But HF is hazardous and must be contained without human exposure and eliminated in an environmentally appropriate manner. In the present dissertation project, HF-Free EP of Nb was performed in sulfuric acid-methanol electrolytes. Sulfuric concentrations of 0.1 M, 0.5 M, 1 M, 2 M, and 3 M were used. Cyclic voltammetry and potential hold experiments were performed in cells of both two-electrode and three-electrode setups to evaluate the electrochemical process. The influence of electrolyte concentration, temperature, and EP duration was investigated. At room temperature, both the corrosion rate and the surface quality obtained were comparable to those currently obtained with HF-based processing. With decreasing temperature, the mean current level decreased and the surface quality improved substantially. For a desired average material removal of 100 μM, nanometer scale surface roughness was obtained under multiple conditions. Mechanism of EP was also investigated by electrochemical impedance spectroscopy (EIS). The EIS diagram indicates the presence of a compact film during EP at mass transport controlled limiting current and a film-free surface during EP at ohmic controlled current. Transfer from a film-free surface to an anodic film precipitation with decreasing temperature was also observed. Microsmoothing is only achieved under mass transport control. Nb⁵⁺ ions are determined to be the mass transport limiting species."],"dc:description.degree":["Ph. D."],"dc:identifier.other":["etd-08032009-170244"],"dc:identifier.uri":["http://hdl.handle.net/10919/28507"],"dc:publisher":["Virginia Tech"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["sulfuric acid-methanol","niobium","electropolishing","hydrofluoric acid-free"],"dc:title":["Electropolishing of Niobium in Sulfuric Acid-Methanol Electrolytes: Development of Hydrofluoric Acid-Free Electrolytes"],"dc:type":["Dissertation"],"thesis:degree_discipline":["Materials Science and Engineering"],"thesis:degree_level":["doctoral"],"thesis:degree_name":["Ph. D."],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-07-22T22:20:00Z"}