Living Polymerization for the Introduction of Tailored Hydrogen Bonding

In an effort to synthesize macromolecules comprising both covalent and non-covalent bonding to tune ultimate physical properties, a variety of methodologies and functionalization strategies were employed. First, protected functional initiation, namely 3-[(N-benzyl-N-methyl)amino]-1-propyllithium and 3-(t-butyldimethylsilyloxy)-1-propyllithium, in living anionic polymerization of isoprene was used to yield well-defined chain end functional macromolecules. Using both initiating systems, polymers with good molar mass control and narrow molar mass distributions were obtained and well-defined chain end functionality was observed. There was no observed effect on the polymer microstructure from the polar functionality in the initiator, with ~92% 1,4- and 8% 3,4-enchainment observed in each case. Further investigation of the 3-[(N-benzyl-N-methyl)amino]-1-propyllithium initiated polyisoprenes proved that facile deprotection was not possible and residual catalyst was not removable from the polymer. However, polymers initiated with 3-(t-butyldimethylsilyloxy)-1-propyllithium were quantitatively hydrogenated and deprotected under relatively mild conditions to yield hydroxyl functional macromolecules in several architectures, including linear and star-shaped. Excellent conversion from arm polymer to star polymer was observed and well-defined macromolecules were obtained. Subsequently, a series of non-functional, hydroxyl functional, and 2-ureido-4[1H]-pyrimidone (UPy) chain end functional linear and star-shaped poly(ethylene-co-propylene)s were synthesized and characterized. The melt phase properties were investigated using melt rheology and the effect of macromolecular topology and multiple hydrogen bond functionality was investigated. Linear UPy functional poly(ethylene-co-propylene)s exhibited increased viscosity and shear thinning onset at lower frequencies than non-functional polymers of similar molar mass due to interaction of the multiple hydrogen bonding groups. Star-shaped UPy functional poly(ethylene-co-propylene)s showed inhibition to terminal flow and the absence of a zero shear viscosity in melt rheological characterization, indicative of a network like structure imparted from the multiple hydrogen bonding interactions. In addition, the living anionic polymerization of D3 was controlled using the functionalized initiators3-[(N-benzyl-N-methyl)amino]-1-propyllithium and 3-(t-butyldimethylsilyloxy)-1-propyllithium. Good molar mass control and narrow molar mass distributions were observed. In contrast to the polyisoprene homopolymers, facile deprotection of the 3-(t-butyldimethylsilyloxy)-1-propyllithium was not possible due to the acid sensitivity of the poly(dimethylsiloxane) backbone. However, facile deprotection of the protected secondary amine was achieved through hydrogenolysis and well-defined terminal amine functionalized poly(dimethylsiloxane) was synthesized, which are then amenable to further functionalization reactions. In contrast to the well-defined polymers synthesized using living anionic polymerization, free radical polymerizations was used to synthesize free radical copolymers with broader polydispersities and pendant UPy groups. These copolymers were compared with a simple dimeric hydrogen bonding carboxylic acid containing copolymer. Melt rheological characterization revealed that, at similar concentrations, the effect of the UPy group was much greater than the carboxylic acid, and broadened plateau moduli and increased viscosity for the UPy containing polymers were observed, while the acid containing polymer exhibited similar results to a non-functional control. The dynamic viscosity was observed to increase systematically with increasing UPyMA incorporation and the quadruple hydrogen bonding interactions were observed to dissociate between ~80-150 °C.

Name thesis:degree_name

Ph. D.

Level thesis:degree_level

doctoral

Discipline thesis:degree_discipline

Chemistry

Department dc:contributor.department

Chemistry

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2005

Author dc:creator

• Elkins, Casey Lynn

Chair dc:contributor.committeechair

• Long, Timothy E.

Committee members dc:contributor.committeemember

• McGrath, James E.
• Riffle, Judy S.
• Armentrout, R. Scott
• Ward, Thomas C.

• anionic polymerization
• multiple hydrogen bonding
• isoprene
• radical polymerization
• melt rheology

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

etd-06102005-124923

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/28008