Back to results

Virginia Tech

Radio Channel Measurements and Modeling for Smart Antenna Array Systems Using a Software Radio Receiver

Abstract

dc:description.abstract

This dissertation presents research performed in the areas of radio wave propagation measurement and modeling, smart antenna arrays, and software-defined radio development. A four-channel, wideband, software-defined receiver was developed to serve as a test bed for wideband measurements and antenna array experiments. This receiver was used to perform vector channel measurements in terrestrial and air-to-ground environments using an antenna array. ent results served as input to radio channel simulations based on three geometric channel models. The simulation results were compared to measurement results to evaluate the performance of the radio channel models under test. Criteria for evaluation include RMS delay spread, excess delay spread, signal envelope fading, antenna diversity gain, and gain achieved through the use of a two-dimensional rake receiver. This research makes contributions to the wireless communications field through analysis, development, measurement, and simulation that builds upon past theoretical and experimental results. Contributions include a software-defined radio architecture, based on object oriented techniques, that has been developed and successfully demonstrated using the wideband receiver. This research has produced new wideband vector channel measurements to provide extensive characterization results facilitating simulation of emerging wireless technology for commercial and military communications systems. Original ways of interpreting multipath component strength and correlation for antenna arrays have been developed and investigated. A novel geometric air-to-ground ellipsoidal channel model has been developed, simulated, and evaluated. Other contributions include an evaluation of two popular radio channel models, a geometric channel simulator for producing channel impulse responses, and analytical derivation results related to channel modeling geometries and multipath channel measurement processing. In addition to new results, existing theory and earlier research results are discussed. Fundamental theory for antenna arrays, vector channels, multipath characterization, and channel modeling is presented. Contemporary issues in software radio and object orientation are described, and measurement results from other propagation research are summarized.

Degree

thesis:*
Name thesis:degree_name
Ph. D.
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2003

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Newhall, William George
Chair dc:contributor.committeechair
  • Reed, Jeffrey H.
Committee members dc:contributor.committeemember
  • Koelling, C. Patrick
  • Tranter, William H.
  • Woerner, Brian D.
  • Stutzman, Warren L.

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
etd-04222003-081312
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/27115

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Newhall, William George. Radio Channel Measurements and Modeling for Smart Antenna Array Systems Using a Software Radio Receiver. doctoral thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/27115