Thermal Properties of Candidate Coolant Salts

With the increasing research on advanced reactors, molten salt reactors have been recognized for their potential. As with any advanced reactor concept, each component and material must be thoroughly investigated before any reactors of that type are created. One of the most pressing issues in MSR research is that of the salts themselves. Though there are a multitude of salts to choose from when designing such a reactor, many of these salts lack the extensive research required to fully understand them. Across the decades there have been many studies that have investigated select molten salts, but there are a few problems with many of those studies. Those problems are the following: prior papers use obsolete and less reliable methods for their measurements, the papers don't investigate the salts across a wide enough range of temperatures nor at varying compositions, and finally many of the salts that are seen as candidates today were not given as much attention when molten salt reactors were first conceptualized which has resulted in a lack of research on them. Indeed, the research into these salts is lacking in many ways. This study seeks to investigate a collection of promising coolant salts in depth with acknowledgment to those past studies. LiF-NaF-KF (46.5-11.5-42.0 mol%) will be used as a calibration standard and for the purpose of verifying our methodology. Specifically, FLiNaK was used in the development of volume-height curves as calibration for density measurements. NaOH-KOH of four different compositions ( 0.5-0.5mol%, 0.55-0.45mol%, 0.6-0.4mol%, and 0.65-0.35 mol%) will be evaluated for their densities and heat capacities. And finally, BeF2-NaF(43-57mol%) will be evaluated within the question of if the properties are desirable enough that the dangers posed by beryllium are an acceptable risk. BeF2-NaF will have melting point, heat capacity, density, and vapor pressure measurements performed. Additionally, extensive impurity analysis and removal (via an HF gas system) was done to our BeF2-NaF samples. The melting point and heat capacity were evaluated using dynamic scanning calorimetry (DSC), the vapor pressure was evaluated using thermogravimetric analysis (TGA), and the density was measured using a system similar to the Arrhenius method that measures height.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Nuclear Engineering

Department dc:contributor.department

Mechanical Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2024

Author dc:creator

• Ridder, Cathleen Elise

Chair dc:contributor.committeechair

• Zhang, Jinsuo

Committee members dc:contributor.committeemember

• Haghighat, Alireza
• Leong, Amanda Sue Wen

• Molten Salt Reactors
• Thermal Properties
• Vapor Pressure
• Heat Capacity
• Density
• Melting Point

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Language dc:language.iso

en

Dc Identifier Other

vt_gsexam:41213

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/120685