Back to results

Virginia Polytechnic Institute

Analysis and computer program for non-prismatic continuous beam and floor section

Abstract

dc:description.abstract

This thesis is based on research by the VPI Agricultural Engineering Department in residential floor structures. Slope-deflection equations and computer programs were developed for theoretically analyzing continuous non-prismatic T-beams. Residential floor systems were treated as a series of three-span continuous T-beams. Cross-sectional area of the stem of the T-beam was doubled over interior supports and for 3 ft. on either side. Computer programs were used for calculating moment, shear, deflection, and rotation over supports for beams with simply supported ends and with one end cantilevered. The computer was also used for determining span ratios that would result in equal maximum deflections when all three spans were subjected to uniformly distributed loads. Several tests were conducted on a full-scale 8 ft. by 48 ft. floor section. Deflection from the experimental tests on continuous joist alone and with plywood subfloor were statistically compared with theoretical deflections. In one case the theoretical equation did not adequately describe the center span and had to be rewritten in order to show no significant difference between theoretical and experimental deflection. In one experiment symmetrical end spans did not act as replicates of each other 2 in which case the maximum experimental deflection was significantly larger than the theoretical deflection. In all other cases there was no significant difference in theoretical and experimental deflections. It would require 33.9% more timber in nominal 2 in. thick lumber as simple beams to provide equal strength and stiffness as the experimental three-span continuous beam.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Agricultural Engineering
Department dc:contributor.department
Agricultural Engineering
Grantor dc:publisher
Virginia Polytechnic Institute
Year dc:date.issued
1967

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Maghsood, Javad

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10919/118529
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/118529

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Maghsood, Javad. Analysis and computer program for non-prismatic continuous beam and floor section. masters thesis, Virginia Polytechnic Institute, 1967. https://hdl.handle.net/10919/118529