Back to results

Virginia Tech

A Hierarchical Noise Control System Using Adaptable Tuned Vibration Absorbers

Abstract

dc:description.abstract

A novel noise control system is developed using adaptable tuned vibration absorbers (ATVA) to interact with a vibrating host structure in such a way as to reduce radiated acoustic energy. ATVA's are single-degree-of-freedom resonant devices that can change their resonant frequency and damping over a range. This ATVA noise control system is targeted at applications with tonal disturbances such as propeller aircraft. The motivation for this work is to better understand and experimentally demonstrate the noise control performance of globally detuned vibration absorbers (i.e. tuned away from the disturbance) compared to that of perfectly tuned devices on complex structures. A two-tier hierarchical control approach is used where a global control algorithm attempts to minimize a global parameter such as radiated acoustic energy by directing the adaptation of subordinate ATVA's. The global control algorithm uses an adaptive simplex search algorithm that requires no initial knowledge of the structure or the ATVA's. The ATVA's also require no model of the structure, each utilizing only the local vibration of its own mass and control gains set by the global controller. Noise control using a single ATVA is first studied on a small simply supported plate. Then, a multiple ATVA system is tested on a large plate structure at several test frequencies where many structural modes participate. Noise reductions up to 22 dB are achieved at locations in the radiated field. Further, it is found in some cases, classic tuning of the ATVA results in increased structural noise radiation. ATVA's are realized by outfitting typical inertial (proof-mass) actuators with a classical feedback loop. The device's resonant frequency and damping can be controlled independently, yet simultaneously via two control gains. The ATVA's are designed, built, and characterized for their adaptable domain and power requirements. A cohesive analytical model of the ATVA is also developed and used to compliment the experimental results.

Degree

thesis:*
Name thesis:degree_name
Ph. D.
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wright, Richard I.
Chair dc:contributor.committeechair
  • Fuller, Christopher R.
Committee members dc:contributor.committeemember
  • Wicks, Alfred L.
  • Gibbs, Gary P.
  • Kidner, Michael R. F.
  • Robertshaw, Harry H.
  • Johnson, Martin E.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright

Identifiers

dc:identifier.*
Dc Identifier Other
etd-05012003-150544
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/11217

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Wright, Richard I.. A Hierarchical Noise Control System Using Adaptable Tuned Vibration Absorbers. doctoral thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/11217