Shear Strength Assessment of Corrosion-Damaged Prestressed Concrete Girders Repaired With CFRP

Corrosion on bridges is a common issue since it can be caused by multiple agents such as marine environments or deicing chemicals. The damages caused by these agents, if left unmitigated, may lead to failure of the superstructures. If corrosion is present in the end regions of the beams, failure of the girders will likely be in shear, which is a sudden failure mode and not the preferred limit state. Therefore, it is beneficial to study repair practices and their advantages, as repairs are often more cost-effective than building entirely new structures. Repairing prestressed girders for shear is not common practice, but with the number of superstructures considered structurally deficient in the United States, additional consideration should be given to repair methods. In this study, two beams were extracted from two decommissioned bridges and were repaired using Carbon Fiber Reinforced Polymer (CFRP) to investigate how well proposed repairs functioned. One of the beams is an American Association of State Highway and Transportation Officials (AASHTO) Type II beam, while the second one is an adjacent box beam. Before repairs were done, the beams had their ends further damaged with accelerated corrosion induced via electrolysis to ensure that the beams would have enough deterioration in their shear span to simulate the worst-case scenario found in the field. Afterwards, the girders had their damage and residual strength estimated, and repairs were designed using guidelines from the American Concrete Institute (ACI) and AASHTO for CFRP repairs. Since the adjacent box beam could only be repaired in flexure, it failed in shear with a load similar to previous studies done in beams from the same bridge, which indicates that repairs for box beams need further investigation. The repairs on the AASHTO Type II beam worked well for shear, and both ends failed in flexure, which is an improved failure mode since failing in flexure is more ductile and predictable than shear failures. One end of the AASHTO Type II beam failed by concrete crushing and CFRP rupturing, and the other end failed by strand rupturing, which shows that the accelerated corrosion worked as was predicted.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Civil Engineering

Department dc:contributor.department

Civil and Environmental Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2022

Author dc:creator

• Alves de Moraes, Alana

Chair dc:contributor.committeechair

• Roberts-Wollmann, Carin L.

Committee members dc:contributor.committeemember

• Hebdon, Matthew Hardy
• Koutromanos, Ioannis

• prestressed
• concrete
• shear
• repair

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Language dc:language.iso

en

Dc Identifier Other

vt_gsexam:33661

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/108133