Evaluation of the Pallet Deflection that Occurs Under Forklift Handling Conditions

Industrial forklifts consist of one of the most common handling methods for pallets in warehouses and distribution centers. Pallets deflect while they are being transported by forklifts due to the weight of the unit load. Thus, most of the deflection is observed to occur on the outside edges and corners of the pallet. Several international standards are used in order to define the maximum deflection for pallet bending, including ISO 8611 and ASTM D1185. However, there is still a lack of understanding on the accuracy of these deflection limits and the exact performance of a pallet during a forklift support condition. Understanding pallet bending during forklift support condition and how it affects the stability of a unit load helps create an industry accepted deflection limit that will help to design safer and more cost-effective pallets. For this study, two chapters were proposed in order to assess pallet deflection and unit load stability. The first chapter consisted of measuring and analyzing the vibration levels for three different industrial forklifts affect by factors such as the speed, the payload of the unit load carried, sensor location, forklift type, and road conditions. The results obtained showed that the highest vibration intensity occurred at 3-4 Hz, while the highest overall Grms value observed was 0.145 G2/Hz (between 1-200 Hz). An increase in the forklift speed caused an increase in vibration intensity. In contrast, an increase in the unit load weight carried by the forklift caused a decrease in vibration intensity. Among the three forklifts studied, the gas-powered forklift had the highest vibration intensity, and all forklifts, when driven on asphalt, experienced more vibration. The second chapter of the research project consisted of evaluating pallet deflection under forklift handling conditions. These conditions included fork tines configuration (leveled and 4° angle), unit load condition (bound and unbound), pallet orientation (across width and across length), and type of handling condition (static and dynamic). The results showed that when unit loads were handled in a static condition, they survived the throughout the entire testing. However, when they were tested under a dynamic condition, and specifically, with the unbound unit loads, they did not survive the entire testing. Moreover, unit loads that were tested with the 4° angle forktines configuration tended to survive longer during the dynamic testing. For this particular case, the unit load capacity obtained based on the ISO 8611 standard was too conservative.

Name thesis:degree_name

M.S.

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Forest and Forest Products

Department dc:contributor.department

Sustainable Biomaterials

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2021

Author dc:creator

• Huang, Yu Yang

Chair dc:contributor.committeechair

• Horvath, Laszlo

Committee members dc:contributor.committeemember

• Bouldin, John
• White, Marshall S.

• Vibration
• Forklift
• Dynamic Load Capacity
• Pallet Deflection
• ISO 8611 Deflection Limit

Statement dc:rights

• Attribution-NonCommercial-NoDerivatives 4.0 International

Licence dc:rights.uri

• http://creativecommons.org/licenses/by-nc-nd/4.0/

Language dc:language.iso

en_US

Handle dc:identifier.uri

http://hdl.handle.net/10919/105226

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/105226