Predictive Simulations of the Impedance-Matched Multi-Axis Test Method Using Data-Driven Modeling

Environmental testing is essential to certify systems to withstand the harsh dynamic loads they may experience in their service environment or during transport. For example, satel- lites are subjected to large vibration and acoustic loads when transported into orbit and need to be certified with tests that are representative of the anticipated loads. However, tra- ditional certification testing specifications can consist of sequential uniaxial vibration tests, which have been found to severely over- and under-test systems needing certification. The recently developed Impedance-Matched Multi-Axis Test (IMMAT) has been shown in the literature to improve upon traditional environmental testing practices through the use of multi-input multi-output testing and impedance matching. Additionally, with the use of numerical models, predictive simulations can be performed to determine optimal testing pa- rameters. Developing an accurate numerical model, however, requires precise knowledge of the system's dynamic characteristics, such as boundary conditions or material properties. These characteristics are not always available and would also require additional testing for verification. Furthermore, some systems may be extremely difficult to model using numerical methods because they contain millions of finite elements requiring impractical times scales to simulate or because they were fabricated before mainstream use of computer aided drafting and finite element analysis but are still in service. An alternative to numerical modeling is data-driven modeling, which does not require knowledge of a system's dynamic characteris- tics. The Continuous Residue Interpolation (CRI) method has been recently developed as a novel approach for building data-driven models of dynamical systems. CRI builds data- driven models by fitting smooth, continuous basis functions to a subset of frequency response function (FRF) measurements from a dynamical system. The resulting fitted basis functions can be sampled at any geometric location to approximate the expected FRF at that location. The research presented in this thesis explores the use of CRI-derived data-driven models in predictive simulations for the IMMAT performed on a Euler-Bernoulli beam. The results of the simulations reveal that CRI-derived data-driven models of a Euler-Bernoulli beam achieve similar performance when compared to a finite element model and make similar decisions when deciding the excitation locations in an IMMAT.

Name thesis:degree_name

Master of Science

Level thesis:degree_level

masters

Discipline thesis:degree_discipline

Mechanical Engineering

Department dc:contributor.department

Mechanical Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2020

Author dc:creator

• Moreno, Kevin Joel

Chairs dc:contributor.committeechair

• Tarazaga, Pablo Alberto
• Sarlo, Rodrigo

Committee member dc:contributor.committeemember

• Burdisso, Ricardo A.

• Environmental Testing
• Data-Driven Modeling
• MIMO Testing

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Language dc:language.iso

en

Dc Identifier Other

vt_gsexam:27701

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/100147