Novel Voltage Control Methods for quasi-Z-source Network Converters with Focus on Fixed DC-Link Voltage, Constant- Frequency and Soft-Switching Operation
type: CreativeWork
description: Power electronic converters reinforce modern energy systems by enabling efficient power transfer among batteries, renewable sources, and the utility grid. quasi-Z-source (qZS) converters are especially attractive for their single-stage buck–boost capability, continuous input current, and inherent reliability. A central challenge, however, is the intermediate DClink capacitor: its voltage varies with operating conditions. Low DC-link voltage drives high full-bridge current, elevating conduction and turn-off losses; high DC-link voltage raises switch stress and device cost. These fluctuations complicate design and control, degrade efficiency, and disrupt consistent soft switching. Conventional pulse-width-modulated (PWM) qZS converters often rely on variable switching frequency or auxiliary circuits to achieve soft switching, which increases cost and control complexity. Resonant qZS converters can enhance gain and facilitate soft-switching yet still exhibit a variable intermediate DC-link between the impedance network and resonant tank, leading to fluctuating electrical stresses, efficiency penalties, and a constrained operating range. Thus, while Z-source–based topologies broaden buck–boost flexibility, they introduce critical trade-offs in efficiency, component stress, and dynamic performance. Single-stage AC–DC qZS implementations also struggle with DC-link regulation. With a DC link capacitor, near-unity power factor typically requires discontinuous current, increasing current stress and limiting power capability; under light load, continuous current can cause DC-link overvoltage. Without a DC-link capacitor, pronounced 120 Hz ripple and switch voltage overshoot appear, often demanding lossy snubbers or added auxiliaries. Consequently, prior approaches either compromise soft-switching or fail to maintain a stable DC-link across wide input and load variations. This thesis proposes three control strategies for single-phase qZS full-bridge converters: a PWM-based DC–…
abstract: Power electronic converters reinforce modern energy systems by enabling efficient power transfer among batteries, renewable sources, and the utility grid. quasi-Z-source (qZS) converters are especially attractive for their single-stage buck–boost capability, continuous input current, and inherent reliability. A central challenge, however, is the intermediate DClink capacitor: its voltage varies with operating conditions. Low DC-link voltage drives high full-bridge current, elevating conduction and turn-off losses; high DC-link voltage raises switch stress and device cost. These fluctuations complicate design and control, degrade efficiency, and disrupt consistent soft switching. Conventional pulse-width-modulated (PWM) qZS converters often rely on variable switching frequency or auxiliary circuits to achieve soft switching, which increases cost and control complexity. Resonant qZS converters can enhance gain and facilitate soft-switching yet still exhibit a variable intermediate DC-link between the impedance network and resonant tank, leading to fluctuating electrical stresses, efficiency penalties, and a constrained operating range. Thus, while Z-source–based topologies broaden buck–boost flexibility, they introduce critical trade-offs in efficiency, component stress, and dynamic performance. Single-stage AC–DC qZS implementations also struggle with DC-link regulation. With a DC link capacitor, near-unity power factor typically requires discontinuous current, increasing current stress and limiting power capability; under light load, continuous current can cause DC-link overvoltage. Without a DC-link capacitor, pronounced 120 Hz ripple and switch voltage overshoot appear, often demanding lossy snubbers or added auxiliaries. Consequently, prior approaches either compromise soft-switching or fail to maintain a stable DC-link across wide input and load variations. This thesis proposes three control strategies for single-phase qZS full-bridge converters: a PWM-based DC–…
author: Mohammadsalehian, Shamim
language: en
keywords: DC-DC converters, AC-DC converters, quasi-Z-source converters, power electronics
date published: 2025-12-15
date modified: 2026-07-27T21:55:58Z
provider: Western University
publisher: Networked Digital Library of Theses and Dissertations
type: WebPage
source organization: The University of Western Ontario

PropertyValue
property ID: Handle
value: https://hdl.handle.net/20.500.14721/39314