Adaptive control for one-DOF finger rehabilitation robot

This project presents one of an adaptive control technique to control the DC motor for one-DOF (Degree of Freedom) finger rehabilitation robot. Many different types of controllers are used to provide accurate positioning of the of the DC motor for the rehabilitation robot. One of the common used in controller system is proportional–integral–derivative controller (PID controller). However, the limitation of the PID controller is unable to adapt the variations in the load, as handgrip stiffness can be varied from patient to patient and PID controller is needed to tune for each stiffness. The performance of the robot will be affected and the steady state error occurred when the unknown and inaccessible load torque is imposed. Therefore, in this project, a Model Reference Adaptive Control (MRAC) is proposed to design a stable controller that able to cope with the variations handgrip stiffness to reduce the positioning error and steady state error. The simulated result show that the designed adaptive controller provides good response with reduced settling time and without steady state error for entire range of handgrip stiffness. The MRAC controller will perform better for rehabilitation robot that able to cope with patients without the aid of any additional stiffness detection sensors.

Name dc:type.qualificationname

mphil

Level dc:type.qualificationlevel

masters

Grantor dc:publisher.institution

Universiti Tun Hussein Onn Malaysia

Year dc:date.issued

2019

Author dc:creator

• Jainal Abidin, Nurul Aqilah

• TJ210.2-211.47 Mechanical devices and figures. Automata. Ingenious mechanisms. Robots (General)

Language dc:language

en