Uncertainty quantification for safety verification applications in nuclear power plants

There is an increasing interest in computational reactor safety analysis to systematically replace the conservative calculations by best estimate calculations augmented by quantitative uncertainty analysis methods. This has been necessitated by recent regulatory requirements that have permitted the use of such methods in reactor safety analysis. Stochastic uncertainty quantification methods have shown great promise, as they are better suited to capture the complexities in real engineering problems. This study proposes a framework for performing uncertainty quantification based on the stochastic approach, which can be applied to enhance safety analysis. Additionally, risk level has increased with the degradation of Nuclear Power Plant (NPP) equipment and instrumentation. In order to achieve NPP safety, it is important to continuously evaluate risk for all potential hazards and fault propagation scenarios and map protection layers to fault / failure / hazard propagation scenarios to be able to evaluate and verify safety level during NPP operation. In this study, the Fault Semantic Network (FSN) methodology is proposed. This involved the development of static and dynamic fault semantic network (FSN) to model possible fault propagation scenarios and the interrelationships among associated process variables. The proposed method was demonstrated by its application to two selected case studies. The use of FSN is essential for fault detection, understanding fault propagation scenarios and to aid in the prevention of catastrophic events. Two transient scenarios were simulated with a best estimate thermal hydraulic code, CATHENA. Stochastic uncertainty quantification and sensitivity analyses were performed using the OPENCOSSAN software which is based on the Monte Carlo method. The effect of uncertainty in input parameters were investigated by analyzing the probability distribution of output parameters. The first four moments (mean, variance, skewness and kurtosis) of the output parameters were computed and analyzed. The uncertainty in output pressure was 0.61% and 0.57% was found for the mass flow rate in the Edward’s blowdown transient. An uncertainty of 0.087% was obtained for output pressure and 0.048% for fuel pin temperature in the RD-14 test case. These results are expected to be useful for providing insight into safety margins related to safety analysis and verification.

Name thesis:degree_name

Doctor of Philosophy (PhD)

Discipline thesis:degree_discipline

Electrical and Computer Engineering

Grantor

University of Ontario Institute of Technology

Year dc:date.issued

2016

Author dc:creator

• Boafo, Emmanuel

Advisor dc:contributor.advisor

• Gaber, Hossam

• Uncertainty quantification
• CATHENA
• Sensitivity analysis
• FSN
• LOCA

Language dc:language.iso

en

Handle dc:identifier.uri

https://hdl.handle.net/10155/733

OAI identifier oai:identifier

oai:ontariotechu.scholaris.ca:10155/733