Back to results

University of Ontario Institute of Technology

Simulation, design and construction of a gas electron multiplier for particle tracking

Abstract

dc:description.abstract

The biological effects of charged particles is of interest in particle therapy, radiation protection and space radiation science and known to be dependent on both absorbed dose and radiation quality or LET. Microdosimetry is a technique which uses a tissue equivalent gas to simulate microscopic tissue sites of the order of cellular dimensions and the principles of gas ionization devices to measure deposited energy. The Gas Electron Multiplier (GEM) has been used since 1997 for tracking particles and for the determination of particle energy. In general, the GEM detector works in either tracking or energy deposition mode. The instrument proposed here is a combination of both, for the purpose of determining the energy deposition in simulated microscopic sites over the charged particle range and in particular at the end of the range where local energy deposition increases in the so-called Bragg-peak region. The detector is designed to track particles of various energies for 5 cm in one dimension, while providing the particle energy deposition every 0.5 cm of its track. The reconfiguration of the detector for different particle energies is very simple and achieved by adjusting the pressure of the gas inside the detector and resistor chain. In this manner, the detector can be used to study various ion beams and their dose distributions to tissues. Initial work is being carried out using an isotopic source of alpha particles and this thesis will describe the construction of the GEM-based detector, computer modelling of the expected gas-gain and performance of the device as well as comparisons with experimentally measured data of segmented energy deposition.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science (MASc)
Discipline thesis:degree_discipline
Nuclear Engineering
Grantor
University of Ontario Institute of Technology
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sipaj, Andrej
Advisor dc:contributor.advisor
  • Waker, Anthony

Subjects

dc:subject × 4

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10155/293
OAI identifier oai:identifier
oai:ontariotechu.scholaris.ca:10155/293

Chain of custody

source
Harvested from
Ontario Institute of Technology
Base URL
ontariotechu.scholaris.ca/server/oai/request
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Sipaj, Andrej. Simulation, design and construction of a gas electron multiplier for particle tracking. University of Ontario Institute of Technology, 2012. https://hdl.handle.net/10155/293