Back to results

University of Nevada - Reno

A Numerical Parametric Study on the Performance of a Low Profile dipole Planar Inverted Cone Antenna Placed over an Electromagnetic Bandgap Structure

Abstract

dc:description.abstract

Electromagnetic Band-gap (EBG) materials are a type of metamaterial with attractive properties not found in nature. EBG materials act as a high impedance surface over a specific frequency range, so they are a good candidate for replacing the conductive ground plane found in most low profile antennas. In this thesis, the effect of EBG materials on a low profile dipole planar inverted cone antenna (LPdiPICA) is investigated. A simple and effective design procedure for deriving the parameters for the Sievenepiper mushroom-like EBG structure is presented. When an optimized EBG substrate replaced the conductive ground plane on the LPdiPICA, it was found that the impedance bandwidth remained large (4.5:1), the broadside minimum at 4 GHz improved by 13.29 dB, but the pattern bandwidth decreased to 3.4:1 .The patch width, gap width, and via diameter were all varied, and It was revealed that each parameter sweep only minimally changed the impedance match and affected only the radiation pattern near the EBG resonant frequency. It was concluded that an EBG substrate can be designed to improve the radiation pattern without affecting the impedance match. The antenna height above the substrate was also varied, but the impedance match quickly degraded past acceptable levels.Lastly, a lower profile version of the LPdiPICA was designed for the 2.4 GHz and 5.8 GHZ industrial, scientific and medical (ISM) bands. The LPdiPICA was placed above the EBG surface such that the overall height was less than 0.1λ. The EBG surface greatly improved the impedance match in each band, but the compromise was reduced gain.

Degree

thesis:*
Level thesis:degree_level
Master's Degree
Year dc:date.issued
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Blitstein, Adam M.
Advisor dc:contributor.advisor
  • Chatterjee, Indira
Committee members dc:contributor.committeemember
  • Henson, James M
  • Tavormina, Joseph J
  • Harris, Jr., Frederick C
  • Read, Marsha H

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright(All Rights Reserved)

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11714/3997
OAI identifier oai:identifier
oai:scholarwolf.unr.edu:11714/3997

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-07-27
Source record
OAI-PMH GetRecord
citation

Blitstein, Adam M.. A Numerical Parametric Study on the Performance of a Low Profile dipole Planar Inverted Cone Antenna Placed over an Electromagnetic Bandgap Structure. Master's Degree thesis, 2011. http://hdl.handle.net/11714/3997