Comprehensive Modeling and Numerical Investigation of Entrained-Flow Coal Gasifiers

Numerical simulations of coal gasification process inside a generic 2-stage entrainedflow gasifier are carried out using the commercial CFD solver ANSYS/FLUENT. The 3-D Navier-Stokes equations and eight species transport equations are solved with three heterogeneous global reactions, three homogeneous reactions, and one thermal cracking equation of volatiles. Finite rates are used for the heterogeneous solid-gas reactions. Both finite rate and eddy-breakup combustion models are calculated for each homogeneous gas-gas reaction, and the smaller of the two rates is used. Lagrangian-Eulerian method is employed. The Eulerian method calculates the continuous phase while the Lagrangian method tracks each coal particle. Fundamental study is carried out to investigate effects of five turbulence models (standard k-ε, k-ω, RSM, k-ω SST, and k-ε RNG) and four devolatilization models (Kobayashi, single rate, constant rate, and CPD) on gasification simulation. A study is also conducted to investigate the effects of different operation parameters on gasification process including coal mixture (dry vs. slurry), oxidant (oxygen-blown vs. air-blown), and different coal distributions between two stages. Finite-rate model and instantaneous gasification model are compared. It is revealed that the instantaneous gasification approach can provide an overall evaluation of relative changes of gasifier performance in terms of temperature, heating value, and gasification efficiency corresponding to parametric variations, but not adequately capture the local gasification process predicted by the finite rate model in most part of the gasifier. Simulations are performed to help with design modifications of a small industrial demonstration entrained-flow gasifier. It is discovered that the benefit of opening the slag tap on the quench-type gasifier wider by allowing slag to move successfully without clogging is compromised by increased heat losses, reduced gasification performance, downgraded syngas heating value, and increased unburned volatiles. The investigation of heat transfer on fuel injectors shows that blunt tip fuel injector is less likely to fail compared to conical tip fuel injector because the maximum high temperature on the injector is scattered. Two concentric fuel/oxidant injections provide better fuel-oxidant mixing and higher syngas heating value than four separate fuel and oxidant injections.

Name thesis:degree_name

Ph.D.

Level thesis:degree_level

Dissertation

Discipline thesis:degree_discipline

Mechanical Engineering

Year

2010

Author dc:creator

• Silaen, Armin

Contributors dc:contributor

• Wang, Ting
• Akyuzlu, Kazim
• Guillot, Martin

• Gasification modeling
• entrained-flow gasifier
• clean coal technology
• syngas production
• multiphase flow

Repository record dc:identifier

https://scholarworks.uno.edu/td/1148

OAI identifier oai:identifier

oai:scholarworks.uno.edu:td-2131