Back to results

University of Nevada, Las Vegas

Two-dimensional finite element model for heat transfer in residential attic using an attic barrier system

Abstract

dc:description.abstract

A two-dimensional finite element model is developed to simulate the thermal performance of a residential attic. The attic is ventilated using an evaporative cooler for the occupied space which vents its exhaust air into the attic. The attic is also ventilated by outside air introduced at the perimeter(soffit) of the attic ceiling and is exhausted at the ridge of the roof; The thermal effects of an installed Attic Radiant Barrier System (ARBS) on the underside of the roof are also investigated. The model is steady state in nature using different solar insolation fluxes and ambient temperatures as driving functions at several discrete hourly values during the day. A ({dollar}k-\varepsilon{dollar}) turbulent model has been used to describe velocity and thermal distributions in the attic. Several recirculation zones have been observed in the attic which seem to suggest the existences of convective cells. Also the effect of lowering the emissivity on the underside of the roof was investigated. This emissivity reduction seems to raise the temperature on the underside of the roof and increase the average bulk temperature of the air leaving the attic while reducing the net heat flux passing through the ceiling insulation. Variations of temperatures have been shown to exist at the edges of the inclined surfaces and insulation especially at the locations of inlet and outlet vents of the attic. Finally, the model will give some correlations, and be compared with the existing correlations, of the length averaged convective heat transfer coefficients on the underside of the inclined surfaces of the roof due to the combined forced and natural flow over these surfaces. (Abstract shortened by UMI.).

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of Nevada, Las Vegas
Year
1996

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alsaiegh, Neezar Taher
Contributors dc:contributor
  • Samir Moujaes

Rights

dc:rights
Statement dc:rights
  • IN COPYRIGHT. For more information about this rights statement, please visit http://rightsstatements.org/vocab/InC/1.0/

Identifiers

dc:identifier.*
OAI identifier oai:identifier
oai:oasis.library.unlv.edu:rtds-1820

Chain of custody

source
Harvested from
University of Nevada - Las Vegas
Base URL
oasis.library.unlv.edu/do/oai/
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
related terms
citation

Alsaiegh, Neezar Taher. Two-dimensional finite element model for heat transfer in residential attic using an attic barrier system. Thesis thesis, University of Nevada, Las Vegas, 1996. https://doi.org/10.25669/oiy1-k5uk