{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/99127"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/99127","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Performance analysis of asphalt mixtures modified with ground tire rubber and recycled materials","abstract":"Extensive research has been done on rubber-modified asphalt due to its distinct performance benefits, resulting in advancements in the existing rubber modifier technologies. This study focuses on two such new rubber-modifier technologies- an Engineered Crumb Rubber (ECR), and a terminal-blend Rubber Modified Asphalt (RMA) product containing ground tire rubber (GTR) and a common elastomeric polymer, tested alongside a mature terminal-blend GTR product commonly used in Chicago and surrounding areas. The study investigates the low-temperature performance of the mixtures and their durability in terms of permanent deformation. Further, the study examined the effect of softer virgin binder and an increased amount of recycled asphalt shingles (RAS) on mix performance. The products were incorporated into Illinois Tollway’s approved Stone Matrix Asphalt (SMA) Surface Friction Warm Mix Asphalt designs using a base binder (PG 58-28), a softer binder (PG 46-34), and softer binder with increased asphalt binder replacement (ABR) percentage (PG 46-34 with high ABR). A suite of tests was conducted on plant-compacted gyratories and field cores, namely, Disk-Shaped Compact Tension (DC(T)) test, DC(T) Creep Compliance test, Acoustic Emission (AE) test, and Hamburg Wheel Tracking Test. Further, DC(T)-Hamburg results were plotted on Performance-Space Diagram to obtain a holistic view of mixture performance. Finally, the mixtures were modeled in Illi-TC, a thermal cracking simulation tool developed at UIUC. The key findings suggested that the mixtures would perform well in cold climates, owing to high fracture energy and high compliance. Rutting resistance of the mixtures was also observed to be very high. Performance-Space diagram plots suggest that higher amounts of recycled content can be successfully used if a suitably soft base binder was employed. In addition, the alignment of the data on a relatively straight line on the Hamburg-DC(T) plot demonstrated a significant advantage of pairing the Hamburg with the DC(T) as bookend performance tests. The master curves from the DC(T) Creep Compliance test was very smooth, and the expected trends were observed, namely, change to a softer binder led to more compliant mixes and the addition of more recycled content to the softer binder led to the stiffer mixture. The embrittlement temperatures, obtained from AE tests, supported the findings from DC(T) fracture energy tests in most cases. Finally, Illi-TC modeling showed zero number of critical thermal events for all the mixtures.","abstract_html":"Extensive research has been done on rubber-modified asphalt due to its distinct performance benefits, resulting in advancements in the existing rubber modifier technologies. This study focuses on two such new rubber-modifier technologies- an Engineered Crumb Rubber (ECR), and a terminal-blend Rubber Modified Asphalt (RMA) product containing ground tire rubber (GTR) and a common elastomeric polymer, tested alongside a mature terminal-blend GTR product commonly used in Chicago and surrounding areas. The study investigates the low-temperature performance of the mixtures and their durability in terms of permanent deformation. Further, the study examined the effect of softer virgin binder and an increased amount of recycled asphalt shingles (RAS) on mix performance. The products were incorporated into Illinois Tollway’s approved Stone Matrix Asphalt (SMA) Surface Friction Warm Mix Asphalt designs using a base binder (PG 58-28), a softer binder (PG 46-34), and softer binder with increased asphalt binder replacement (ABR) percentage (PG 46-34 with high ABR). A suite of tests was conducted on plant-compacted gyratories and field cores, namely, Disk-Shaped Compact Tension (DC(T)) test, DC(T) Creep Compliance test, Acoustic Emission (AE) test, and Hamburg Wheel Tracking Test. Further, DC(T)-Hamburg results were plotted on Performance-Space Diagram to obtain a holistic view of mixture performance. Finally, the mixtures were modeled in Illi-TC, a thermal cracking simulation tool developed at UIUC. The key findings suggested that the mixtures would perform well in cold climates, owing to high fracture energy and high compliance. Rutting resistance of the mixtures was also observed to be very high. Performance-Space diagram plots suggest that higher amounts of recycled content can be successfully used if a suitably soft base binder was employed. In addition, the alignment of the data on a relatively straight line on the Hamburg-DC(T) plot demonstrated a significant advantage of pairing the Hamburg with the DC(T) as bookend performance tests. The master curves from the DC(T) Creep Compliance test was very smooth, and the expected trends were observed, namely, change to a softer binder led to more compliant mixes and the addition of more recycled content to the softer binder led to the stiffer mixture. The embrittlement temperatures, obtained from AE tests, supported the findings from DC(T) fracture energy tests in most cases. Finally, Illi-TC modeling showed zero number of critical thermal events for all the mixtures.","abstract_has_math":false,"creators":["Rath, Punyaslok"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Civil Engineering","degree_department":null,"school":null,"contributors":["Buttlar, William G."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2018,"date_issued":"2018-03-02T19:59:47Z","date_published":"2018-03-02T19:59:47Z","updated_at":"2026-07-22T22:24:37Z","subjects":["Rubber","Ground tire rubber (GTR)","Thermal cracking","Creep test","Disk-Shaped Compact Tension (DC(T))"],"languages":["en"],"rights":["Copyright 2017 Punyaslok Rath"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/99127","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Buttlar, William G."]},{"key":"dc:creator","label":"Author","values":["Rath, Punyaslok"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2018-03-02T19:59:47Z","2020-03-03T10:15:32Z","2017-07-19","2017-08"]},{"key":"dc:type","label":"Dc Type","values":["text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Rubber","Ground tire rubber (GTR)","Thermal cracking","Creep test","Disk-Shaped Compact Tension (DC(T))"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2017 Punyaslok Rath"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/99127"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Extensive research has been done on rubber-modified asphalt due to its distinct performance benefits, resulting in advancements in the existing rubber modifier technologies. This study focuses on two such new rubber-modifier technologies- an Engineered Crumb Rubber (ECR), and a terminal-blend Rubber Modified Asphalt (RMA) product containing ground tire rubber (GTR) and a common elastomeric polymer, tested alongside a mature terminal-blend GTR product commonly used in Chicago and surrounding areas. The study investigates the low-temperature performance of the mixtures and their durability in terms of permanent deformation. Further, the study examined the effect of softer virgin binder and an increased amount of recycled asphalt shingles (RAS) on mix performance. The products were incorporated into Illinois Tollway’s approved Stone Matrix Asphalt (SMA) Surface Friction Warm Mix Asphalt designs using a base binder (PG 58-28), a softer binder (PG 46-34), and softer binder with increased asphalt binder replacement (ABR) percentage (PG 46-34 with high ABR). A suite of tests was conducted on plant-compacted gyratories and field cores, namely, Disk-Shaped Compact Tension (DC(T)) test, DC(T) Creep Compliance test, Acoustic Emission (AE) test, and Hamburg Wheel Tracking Test. Further, DC(T)-Hamburg results were plotted on Performance-Space Diagram to obtain a holistic view of mixture performance. Finally, the mixtures were modeled in Illi-TC, a thermal cracking simulation tool developed at UIUC. The key findings suggested that the mixtures would perform well in cold climates, owing to high fracture energy and high compliance. Rutting resistance of the mixtures was also observed to be very high. Performance-Space diagram plots suggest that higher amounts of recycled content can be successfully used if a suitably soft base binder was employed. In addition, the alignment of the data on a relatively straight line on the Hamburg-DC(T) plot demonstrated a significant advantage of pairing the Hamburg with the DC(T) as bookend performance tests. The master curves from the DC(T) Creep Compliance test was very smooth, and the expected trends were observed, namely, change to a softer binder led to more compliant mixes and the addition of more recycled content to the softer binder led to the stiffer mixture. The embrittlement temperatures, obtained from AE tests, supported the findings from DC(T) fracture energy tests in most cases. Finally, Illi-TC modeling showed zero number of critical thermal events for all the mixtures.","Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2019-08-01","The student, Punyaslok Rath, accepted the attached license on 2017-07-19 at 12:48.","The student, Punyaslok Rath, submitted this Thesis for approval on 2017-07-19 at 12:57.","This Thesis was approved for publication on 2017-07-19 at 14:14.","DSpace SAF Submission Ingestion Package generated from Vireo submission #11531 on 2018-03-02 at 13:02:42","Made available in DSpace on 2018-03-02T19:59:47Z (GMT). No. of bitstreams: 2 RATH-THESIS-2017.pdf: 4175577 bytes, checksum: b65e2786eabed3e20c334af4aa233c8d (MD5) LICENSE.txt: 4211 bytes, checksum: c92397168654cfcd6d33f3d477b325e2 (MD5) Previous issue date: 2017-07-19","Embargo set by: Seth Robbins for item 105081 Lift date: 2020-03-02T19:59:52Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 105081 Lift date: 2020-03-02T20:02:46Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","U of I Only Restriction Lifted for Item 105081 on 2020-03-03T10:15:32Z."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Performance analysis of asphalt mixtures modified with ground tire rubber and recycled materials"]}]}],"canonical_facts":{"dc:contributor":["Buttlar, William G."],"dc:creator":["Rath, Punyaslok"],"dc:date":["2018-03-02T19:59:47Z","2020-03-03T10:15:32Z","2017-07-19","2017-08"],"dc:description":["Extensive research has been done on rubber-modified asphalt due to its distinct performance benefits, resulting in advancements in the existing rubber modifier technologies. This study focuses on two such new rubber-modifier technologies- an Engineered Crumb Rubber (ECR), and a terminal-blend Rubber Modified Asphalt (RMA) product containing ground tire rubber (GTR) and a common elastomeric polymer, tested alongside a mature terminal-blend GTR product commonly used in Chicago and surrounding areas. The study investigates the low-temperature performance of the mixtures and their durability in terms of permanent deformation. Further, the study examined the effect of softer virgin binder and an increased amount of recycled asphalt shingles (RAS) on mix performance. The products were incorporated into Illinois Tollway’s approved Stone Matrix Asphalt (SMA) Surface Friction Warm Mix Asphalt designs using a base binder (PG 58-28), a softer binder (PG 46-34), and softer binder with increased asphalt binder replacement (ABR) percentage (PG 46-34 with high ABR). A suite of tests was conducted on plant-compacted gyratories and field cores, namely, Disk-Shaped Compact Tension (DC(T)) test, DC(T) Creep Compliance test, Acoustic Emission (AE) test, and Hamburg Wheel Tracking Test. Further, DC(T)-Hamburg results were plotted on Performance-Space Diagram to obtain a holistic view of mixture performance. Finally, the mixtures were modeled in Illi-TC, a thermal cracking simulation tool developed at UIUC. The key findings suggested that the mixtures would perform well in cold climates, owing to high fracture energy and high compliance. Rutting resistance of the mixtures was also observed to be very high. Performance-Space diagram plots suggest that higher amounts of recycled content can be successfully used if a suitably soft base binder was employed. In addition, the alignment of the data on a relatively straight line on the Hamburg-DC(T) plot demonstrated a significant advantage of pairing the Hamburg with the DC(T) as bookend performance tests. The master curves from the DC(T) Creep Compliance test was very smooth, and the expected trends were observed, namely, change to a softer binder led to more compliant mixes and the addition of more recycled content to the softer binder led to the stiffer mixture. The embrittlement temperatures, obtained from AE tests, supported the findings from DC(T) fracture energy tests in most cases. Finally, Illi-TC modeling showed zero number of critical thermal events for all the mixtures.","Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2019-08-01","The student, Punyaslok Rath, accepted the attached license on 2017-07-19 at 12:48.","The student, Punyaslok Rath, submitted this Thesis for approval on 2017-07-19 at 12:57.","This Thesis was approved for publication on 2017-07-19 at 14:14.","DSpace SAF Submission Ingestion Package generated from Vireo submission #11531 on 2018-03-02 at 13:02:42","Made available in DSpace on 2018-03-02T19:59:47Z (GMT). No. of bitstreams: 2 RATH-THESIS-2017.pdf: 4175577 bytes, checksum: b65e2786eabed3e20c334af4aa233c8d (MD5) LICENSE.txt: 4211 bytes, checksum: c92397168654cfcd6d33f3d477b325e2 (MD5) Previous issue date: 2017-07-19","Embargo set by: Seth Robbins for item 105081 Lift date: 2020-03-02T19:59:52Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 105081 Lift date: 2020-03-02T20:02:46Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","U of I Only Restriction Lifted for Item 105081 on 2020-03-03T10:15:32Z."],"dc:format":["application/pdf"],"dc:identifier":["http://hdl.handle.net/2142/99127"],"dc:language":["en"],"dc:rights":["Copyright 2017 Punyaslok Rath"],"dc:subject":["Rubber","Ground tire rubber (GTR)","Thermal cracking","Creep test","Disk-Shaped Compact Tension (DC(T))"],"dc:title":["Performance analysis of asphalt mixtures modified with ground tire rubber and recycled materials"],"dc:type":["text"],"thesis:degree_discipline":["Civil Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:24:37Z"}