{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/30950"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/30950","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Experimental investigation of multielement airfoils for large-scale wind turbines","abstract":"Experimental results for high-lift multielement airfoils for application to megawatt-scale wind turbines are presented in this thesis. Two different airfoil configurations tested were designed for the inboard section of a 10 MW-scale wind turbine. The airfoil systems were designed as an airfoil system to replace a baseline airfoil that is 40.1% thick. A three-element system consisted of a main element and two flaps and a four-element system was tested with an additional strut. Experiments were performed with the ability to move two flaps to any location relative to a main element. Data were collected at a constant Reynolds number of 1.0 million. Tests were performed in the University of Illinois low turbulence subsonic wind tunnel with a chord length of approximately 1.5 feet (0.46 m) and a model span of approximately 2.8 feet (0.85 m). Results for the Reynolds number tested indicate that lift and drag do not always follow the same trends with respect to gap or overhang. In general, gap size should be no smaller than 2.0% system chord to avoid degradation in performance. In addition, a large overhang can adversely affect aerodynamic performance and lead to a loss of lift but also a reduction in drag. Consequently, it is important in the airfoil design process to identify the balance between aerodynamic efficiency and high lift configurations.","abstract_html":"Experimental results for high-lift multielement airfoils for application to megawatt-scale wind turbines are presented in this thesis. Two different airfoil configurations tested were designed for the inboard section of a 10 MW-scale wind turbine. The airfoil systems were designed as an airfoil system to replace a baseline airfoil that is 40.1% thick. A three-element system consisted of a main element and two flaps and a four-element system was tested with an additional strut. Experiments were performed with the ability to move two flaps to any location relative to a main element. Data were collected at a constant Reynolds number of 1.0 million. Tests were performed in the University of Illinois low turbulence subsonic wind tunnel with a chord length of approximately 1.5 feet (0.46 m) and a model span of approximately 2.8 feet (0.85 m). Results for the Reynolds number tested indicate that lift and drag do not always follow the same trends with respect to gap or overhang. In general, gap size should be no smaller than 2.0% system chord to avoid degradation in performance. In addition, a large overhang can adversely affect aerodynamic performance and lead to a loss of lift but also a reduction in drag. Consequently, it is important in the airfoil design process to identify the balance between aerodynamic efficiency and high lift configurations.","abstract_has_math":false,"creators":["Pomeroy, Brent"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Aerospace Engineering","degree_department":null,"school":null,"contributors":["Selig, Michael S."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2012,"date_issued":"2012-05-22T00:17:54Z","date_published":"2012-05-22T00:17:54Z","updated_at":"2026-07-22T22:25:29Z","subjects":["Aerodynamics","wind turbine","wind tunnel","airfoil","Multielement","multielement airfoil","multi element","multi-element","multi element airfoil","multi-element airfoil","high lift"],"languages":["en"],"rights":["Copyright 2012 Brent W. Pomeroy"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/30950","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Selig, Michael S."]},{"key":"dc:creator","label":"Author","values":["Pomeroy, Brent"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2012-05-22T00:17:54Z","2012-05"]},{"key":"dc:type","label":"Dc Type","values":["text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Aerospace Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Aerodynamics","wind turbine","wind tunnel","airfoil","Multielement","multielement airfoil","multi element","multi-element","multi element airfoil","multi-element airfoil","high lift"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2012 Brent W. Pomeroy"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/30950"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Experimental results for high-lift multielement airfoils for application to megawatt-scale wind turbines are presented in this thesis. Two different airfoil configurations tested were designed for the inboard section of a 10 MW-scale wind turbine. The airfoil systems were designed as an airfoil system to replace a baseline airfoil that is 40.1% thick. A three-element system consisted of a main element and two flaps and a four-element system was tested with an additional strut. Experiments were performed with the ability to move two flaps to any location relative to a main element. Data were collected at a constant Reynolds number of 1.0 million. Tests were performed in the University of Illinois low turbulence subsonic wind tunnel with a chord length of approximately 1.5 feet (0.46 m) and a model span of approximately 2.8 feet (0.85 m). Results for the Reynolds number tested indicate that lift and drag do not always follow the same trends with respect to gap or overhang. In general, gap size should be no smaller than 2.0% system chord to avoid degradation in performance. In addition, a large overhang can adversely affect aerodynamic performance and lead to a loss of lift but also a reduction in drag. Consequently, it is important in the airfoil design process to identify the balance between aerodynamic efficiency and high lift configurations.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2012-04-23T17:34:41Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 2 Pomeroy_Brent_TeXandBib.zip: 104739797 bytes, checksum: eada34a285e14eb74faa7c10e909cc58 (MD5) Pomeroy_Brent.pdf: 49612607 bytes, checksum: 217364bc2e3c36fae48f45a72b7fa8f8 (MD5)","Made available in DSpace on 2012-05-22T00:17:54Z (GMT). No. of bitstreams: 3 pomeroy_brent.pdf: 49612660 bytes, checksum: 55fbe9e722943639240c11f13c3e8264 (MD5) Pomeroy_Brent_TeXandBib.zip: 104739797 bytes, checksum: eada34a285e14eb74faa7c10e909cc58 (MD5) license.txt: 4063 bytes, checksum: 4b932f6012e688dc84e14b986b015146 (MD5)"]},{"key":"dc:title","label":"Title","values":["Experimental investigation of multielement airfoils for large-scale wind turbines"]}]}],"canonical_facts":{"dc:contributor":["Selig, Michael S."],"dc:creator":["Pomeroy, Brent"],"dc:date":["2012-05-22T00:17:54Z","2012-05"],"dc:description":["Experimental results for high-lift multielement airfoils for application to megawatt-scale wind turbines are presented in this thesis. Two different airfoil configurations tested were designed for the inboard section of a 10 MW-scale wind turbine. The airfoil systems were designed as an airfoil system to replace a baseline airfoil that is 40.1% thick. A three-element system consisted of a main element and two flaps and a four-element system was tested with an additional strut. Experiments were performed with the ability to move two flaps to any location relative to a main element. Data were collected at a constant Reynolds number of 1.0 million. Tests were performed in the University of Illinois low turbulence subsonic wind tunnel with a chord length of approximately 1.5 feet (0.46 m) and a model span of approximately 2.8 feet (0.85 m). Results for the Reynolds number tested indicate that lift and drag do not always follow the same trends with respect to gap or overhang. In general, gap size should be no smaller than 2.0% system chord to avoid degradation in performance. In addition, a large overhang can adversely affect aerodynamic performance and lead to a loss of lift but also a reduction in drag. Consequently, it is important in the airfoil design process to identify the balance between aerodynamic efficiency and high lift configurations.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2012-04-23T17:34:41Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 2 Pomeroy_Brent_TeXandBib.zip: 104739797 bytes, checksum: eada34a285e14eb74faa7c10e909cc58 (MD5) Pomeroy_Brent.pdf: 49612607 bytes, checksum: 217364bc2e3c36fae48f45a72b7fa8f8 (MD5)","Made available in DSpace on 2012-05-22T00:17:54Z (GMT). No. of bitstreams: 3 pomeroy_brent.pdf: 49612660 bytes, checksum: 55fbe9e722943639240c11f13c3e8264 (MD5) Pomeroy_Brent_TeXandBib.zip: 104739797 bytes, checksum: eada34a285e14eb74faa7c10e909cc58 (MD5) license.txt: 4063 bytes, checksum: 4b932f6012e688dc84e14b986b015146 (MD5)"],"dc:identifier":["http://hdl.handle.net/2142/30950"],"dc:language":["en"],"dc:rights":["Copyright 2012 Brent W. Pomeroy"],"dc:subject":["Aerodynamics","wind turbine","wind tunnel","airfoil","Multielement","multielement airfoil","multi element","multi-element","multi element airfoil","multi-element airfoil","high lift"],"dc:title":["Experimental investigation of multielement airfoils for large-scale wind turbines"],"dc:type":["text"],"thesis:degree_discipline":["Aerospace Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:29Z"}