{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/29424"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/29424","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Metal foams as novel materials for air-cooling heat exchangers","abstract":"High-porosity metal foams have thermal, mechanical, electrical, and acoustic properties making them attractive for various engineering applications. Due to their large surface-area-to-volume ratio, tortuous flow path, and relatively high thermal conductivity they are being considered for a range of heat transfer applications. In this experimental study, open-cell aluminum metal foam is considered as a replacement for conventional louvered fins in brazed-aluminum heat exchangers. Closed-loop wind tunnel experiments are conducted to measure the pressure drop and heat transfer performance of metal-foam heat exchangers. In addition to characterizing the air-side pressure-drop and heat transfer performance, issues related to condensate drainage and frost formation are considered. The main performance obstacle for the application of metal foams is the relatively high pressure drop occurring for velocities typical to air-cooling applications. This high pressure drop results in larger air-side fan power requirements if metal foams are used as a “drop-in replacement” for louver fins. On the other hand, the heat transfer performance of the metal foams far surpasses that of conventional louvered fins, reaching two to three times the heat transfer coefficient of conventional fins. Smaller pore sizes provide larger surface area per unit volume and enhanced mixing, resulting in higher heat transfer. This excellent heat transfer performance means that alternate deployments of the metal foam are possible to manage fan power, while achieving comparable thermal performance. The experimental data are presented in terms of friction factors and Colburn j factors, and design correlations are developed to predict heat exchanger performance. Under wet-surface conditions, water retention can be an important problem for louvered-fin operation. Surprisingly, metal foams have water drainage behavior superior to that of conventional fins. The effects of geometry, porosity, surface treatment, and orientation on water drainage have been analyzed.","abstract_html":"High-porosity metal foams have thermal, mechanical, electrical, and acoustic properties making them attractive for various engineering applications. Due to their large surface-area-to-volume ratio, tortuous flow path, and relatively high thermal conductivity they are being considered for a range of heat transfer applications. In this experimental study, open-cell aluminum metal foam is considered as a replacement for conventional louvered fins in brazed-aluminum heat exchangers. Closed-loop wind tunnel experiments are conducted to measure the pressure drop and heat transfer performance of metal-foam heat exchangers. In addition to characterizing the air-side pressure-drop and heat transfer performance, issues related to condensate drainage and frost formation are considered. The main performance obstacle for the application of metal foams is the relatively high pressure drop occurring for velocities typical to air-cooling applications. This high pressure drop results in larger air-side fan power requirements if metal foams are used as a “drop-in replacement” for louver fins. On the other hand, the heat transfer performance of the metal foams far surpasses that of conventional louvered fins, reaching two to three times the heat transfer coefficient of conventional fins. Smaller pore sizes provide larger surface area per unit volume and enhanced mixing, resulting in higher heat transfer. This excellent heat transfer performance means that alternate deployments of the metal foam are possible to manage fan power, while achieving comparable thermal performance. The experimental data are presented in terms of friction factors and Colburn j factors, and design correlations are developed to predict heat exchanger performance. Under wet-surface conditions, water retention can be an important problem for louvered-fin operation. Surprisingly, metal foams have water drainage behavior superior to that of conventional fins. The effects of geometry, porosity, surface treatment, and orientation on water drainage have been analyzed.","abstract_has_math":false,"creators":["Nawaz, Kashif"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":["Jacobi, Anthony M."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2012,"date_issued":"2012-02-01T00:45:47Z","date_published":"2012-02-01T00:45:47Z","updated_at":"2026-07-22T22:25:27Z","subjects":["Metal foams","Heat exchangers","Pressure drop","Heat transfer coefficient","condensate drainage","Frost formation"],"languages":["en"],"rights":["Copyright 2011 Kashif Nawaz"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/29424","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Jacobi, Anthony M."]},{"key":"dc:creator","label":"Author","values":["Nawaz, Kashif"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2012-02-01T00:45:47Z","2014-02-01T11:00:25Z","2011-12"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation / Thesis","text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Metal foams","Heat exchangers","Pressure drop","Heat transfer coefficient","condensate drainage","Frost formation"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2011 Kashif Nawaz"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/29424"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["High-porosity metal foams have thermal, mechanical, electrical, and acoustic properties making them attractive for various engineering applications. Due to their large surface-area-to-volume ratio, tortuous flow path, and relatively high thermal conductivity they are being considered for a range of heat transfer applications. In this experimental study, open-cell aluminum metal foam is considered as a replacement for conventional louvered fins in brazed-aluminum heat exchangers. Closed-loop wind tunnel experiments are conducted to measure the pressure drop and heat transfer performance of metal-foam heat exchangers. In addition to characterizing the air-side pressure-drop and heat transfer performance, issues related to condensate drainage and frost formation are considered. The main performance obstacle for the application of metal foams is the relatively high pressure drop occurring for velocities typical to air-cooling applications. This high pressure drop results in larger air-side fan power requirements if metal foams are used as a “drop-in replacement” for louver fins. On the other hand, the heat transfer performance of the metal foams far surpasses that of conventional louvered fins, reaching two to three times the heat transfer coefficient of conventional fins. Smaller pore sizes provide larger surface area per unit volume and enhanced mixing, resulting in higher heat transfer. This excellent heat transfer performance means that alternate deployments of the metal foam are possible to manage fan power, while achieving comparable thermal performance. The experimental data are presented in terms of friction factors and Colburn j factors, and design correlations are developed to predict heat exchanger performance. Under wet-surface conditions, water retention can be an important problem for louvered-fin operation. Surprisingly, metal foams have water drainage behavior superior to that of conventional fins. The effects of geometry, porosity, surface treatment, and orientation on water drainage have been analyzed.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2011-12-06T20:03:43Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 Nawaz_Kashif.pdf: 3672800 bytes, checksum: aba11b231fa7266a2a5495204b4f469b (MD5)","Made available in DSpace on 2012-02-01T00:45:47Z (GMT). No. of bitstreams: 2 Nawaz_Kashif.pdf: 3624628 bytes, checksum: 46043d7e9368074caa4c55e9a56d06fa (MD5) license.txt: 4060 bytes, checksum: e058164fd407b45f7f7674e06b09bfce (MD5)","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by William Ingram (wingram2@illinois.edu) on 2012-02-01T00:50:20Z Item is restricted until 2014-02-01T00:50:07Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2014-02-01T11:00:25Z Item was in collections: Dissertations and Theses - Mechanical Science and Engineering (ID: 675) Graduate Theses and Dissertations at Illinois (ID: 204) No. of bitstreams: 3 Nawaz_Kashif.pdf: 3624628 bytes, checksum: 46043d7e9368074caa4c55e9a56d06fa (MD5) license.txt: 4060 bytes, checksum: e058164fd407b45f7f7674e06b09bfce (MD5) Nawaz_Kashif.pdf.txt: 158060 bytes, checksum: aee9bb6dcdeca06be8d8936df2d26ec5 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2014-02-01T11:00:25Z"]},{"key":"dc:title","label":"Title","values":["Metal foams as novel materials for air-cooling heat exchangers"]}]}],"canonical_facts":{"dc:contributor":["Jacobi, Anthony M."],"dc:creator":["Nawaz, Kashif"],"dc:date":["2012-02-01T00:45:47Z","2014-02-01T11:00:25Z","2011-12"],"dc:description":["High-porosity metal foams have thermal, mechanical, electrical, and acoustic properties making them attractive for various engineering applications. Due to their large surface-area-to-volume ratio, tortuous flow path, and relatively high thermal conductivity they are being considered for a range of heat transfer applications. In this experimental study, open-cell aluminum metal foam is considered as a replacement for conventional louvered fins in brazed-aluminum heat exchangers. Closed-loop wind tunnel experiments are conducted to measure the pressure drop and heat transfer performance of metal-foam heat exchangers. In addition to characterizing the air-side pressure-drop and heat transfer performance, issues related to condensate drainage and frost formation are considered. The main performance obstacle for the application of metal foams is the relatively high pressure drop occurring for velocities typical to air-cooling applications. This high pressure drop results in larger air-side fan power requirements if metal foams are used as a “drop-in replacement” for louver fins. On the other hand, the heat transfer performance of the metal foams far surpasses that of conventional louvered fins, reaching two to three times the heat transfer coefficient of conventional fins. Smaller pore sizes provide larger surface area per unit volume and enhanced mixing, resulting in higher heat transfer. This excellent heat transfer performance means that alternate deployments of the metal foam are possible to manage fan power, while achieving comparable thermal performance. The experimental data are presented in terms of friction factors and Colburn j factors, and design correlations are developed to predict heat exchanger performance. Under wet-surface conditions, water retention can be an important problem for louvered-fin operation. Surprisingly, metal foams have water drainage behavior superior to that of conventional fins. The effects of geometry, porosity, surface treatment, and orientation on water drainage have been analyzed.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2011-12-06T20:03:43Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 Nawaz_Kashif.pdf: 3672800 bytes, checksum: aba11b231fa7266a2a5495204b4f469b (MD5)","Made available in DSpace on 2012-02-01T00:45:47Z (GMT). No. of bitstreams: 2 Nawaz_Kashif.pdf: 3624628 bytes, checksum: 46043d7e9368074caa4c55e9a56d06fa (MD5) license.txt: 4060 bytes, checksum: e058164fd407b45f7f7674e06b09bfce (MD5)","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by William Ingram (wingram2@illinois.edu) on 2012-02-01T00:50:20Z Item is restricted until 2014-02-01T00:50:07Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2014-02-01T11:00:25Z Item was in collections: Dissertations and Theses - Mechanical Science and Engineering (ID: 675) Graduate Theses and Dissertations at Illinois (ID: 204) No. of bitstreams: 3 Nawaz_Kashif.pdf: 3624628 bytes, checksum: 46043d7e9368074caa4c55e9a56d06fa (MD5) license.txt: 4060 bytes, checksum: e058164fd407b45f7f7674e06b09bfce (MD5) Nawaz_Kashif.pdf.txt: 158060 bytes, checksum: aee9bb6dcdeca06be8d8936df2d26ec5 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2014-02-01T11:00:25Z"],"dc:identifier":["http://hdl.handle.net/2142/29424"],"dc:language":["en"],"dc:rights":["Copyright 2011 Kashif Nawaz"],"dc:subject":["Metal foams","Heat exchangers","Pressure drop","Heat transfer coefficient","condensate drainage","Frost formation"],"dc:title":["Metal foams as novel materials for air-cooling heat exchangers"],"dc:type":["Dissertation / Thesis","text"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:27Z"}