{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/22214"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/22214","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Creep, fatigue, and environmental response of Alloy 800H tested at 900 degrees C","abstract":"Creep and creep rupture studies have been carried out at 900$\\sp\\circ$C in lab air and in vacuum on Alloy 800H. Three different notch acuities were chosen so that the effect of stress intensity on the rupture lifetimes could be examined. The effect of oxidation on the creep rupture lifetimes has also been examined using reduced section modelling and vacuum testing of pre-oxidized specimens. Tests in oxidizing environments were found to have similar, but somewhat shorter failure lives compared to vacuum exposure. This effect is accentuated in the low stress notched specimen tests where the stress concentration and oxidation can act together most effectively to reduce failure life.","abstract_html":"Creep and creep rupture studies have been carried out at 900$\\sp\\circ$C in lab air and in vacuum on Alloy 800H. Three different notch acuities were chosen so that the effect of stress intensity on the rupture lifetimes could be examined. The effect of oxidation on the creep rupture lifetimes has also been examined using reduced section modelling and vacuum testing of pre-oxidized specimens. Tests in oxidizing environments were found to have similar, but somewhat shorter failure lives compared to vacuum exposure. This effect is accentuated in the low stress notched specimen tests where the stress concentration and oxidation can act together most effectively to reduce failure life.","abstract_has_math":true,"creators":["Leet, David Michael"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"Ph.D.","degree_level":"Dissertation","degree_discipline":"Materials Science and Engineering","degree_department":null,"school":null,"contributors":["Stubbins, James F."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-05-07T13:32:43Z","date_published":"2011-05-07T13:32:43Z","updated_at":"2026-07-22T22:25:19Z","subjects":["Engineering, Nuclear","Engineering, Metallurgy","Engineering, Materials Science"],"languages":["eng"],"rights":["Copyright 1990 Leet, David Michael"],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["AAI9026246","(UMI)AAI9026246"],"render_values":[{"text":"AAI9026246","href":null,"code":true},{"text":"(UMI)AAI9026246","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/2142/22214","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Stubbins, James F."]},{"key":"dc:creator","label":"Author","values":["Leet, David Michael"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2011-05-07T13:32:43Z","10000-01-01","1990"]},{"key":"dc:type","label":"Dc Type","values":["text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Materials Science and Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph.D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Engineering, Nuclear","Engineering, Metallurgy","Engineering, Materials Science"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 1990 Leet, David Michael"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["AAI9026246","(UMI)AAI9026246","http://hdl.handle.net/2142/22214"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Creep and creep rupture studies have been carried out at 900$\\sp\\circ$C in lab air and in vacuum on Alloy 800H. Three different notch acuities were chosen so that the effect of stress intensity on the rupture lifetimes could be examined. The effect of oxidation on the creep rupture lifetimes has also been examined using reduced section modelling and vacuum testing of pre-oxidized specimens. Tests in oxidizing environments were found to have similar, but somewhat shorter failure lives compared to vacuum exposure. This effect is accentuated in the low stress notched specimen tests where the stress concentration and oxidation can act together most effectively to reduce failure life.","A direct current potential drop technique was utilized to monitor in situ creep strain. A high speed data acquisition system was employed to collect and transform the direct current potential drop data. This methodology was found to provide accurate measurements of creep strain even in notched specimens.","A finite difference method was developed to perform second derivative analysis of the creep curves. This technique showed that it is possible to quantitatively identify the end points of the various creep stages as well as to identify crack initiation and crack advance events.","High resolution electron metallography was performed on the creep and creep rupture specimens, and a finite element analysis of smooth and notched specimens was used, in conjunction with this microstructural data, to aid in the interpretation of the smooth and notched specimen failures.","Made available in DSpace on 2011-05-07T13:32:43Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9026246.pdf: 3845057 bytes, checksum: 9c1c7ed183533a5e5cecb5bce316292e (MD5) Previous issue date: 1990","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:56:06Z Item is restricted indefinitely.","Restriction data tranferred 2014-07-01T11:26:12-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission","ETDs are only available to UIUC Users without author permission","U of I Only"]},{"key":"dc:title","label":"Title","values":["Creep, fatigue, and environmental response of Alloy 800H tested at 900 degrees C"]}]}],"canonical_facts":{"dc:contributor":["Stubbins, James F."],"dc:creator":["Leet, David Michael"],"dc:date":["2011-05-07T13:32:43Z","10000-01-01","1990"],"dc:description":["Creep and creep rupture studies have been carried out at 900$\\sp\\circ$C in lab air and in vacuum on Alloy 800H. Three different notch acuities were chosen so that the effect of stress intensity on the rupture lifetimes could be examined. The effect of oxidation on the creep rupture lifetimes has also been examined using reduced section modelling and vacuum testing of pre-oxidized specimens. Tests in oxidizing environments were found to have similar, but somewhat shorter failure lives compared to vacuum exposure. This effect is accentuated in the low stress notched specimen tests where the stress concentration and oxidation can act together most effectively to reduce failure life.","A direct current potential drop technique was utilized to monitor in situ creep strain. A high speed data acquisition system was employed to collect and transform the direct current potential drop data. This methodology was found to provide accurate measurements of creep strain even in notched specimens.","A finite difference method was developed to perform second derivative analysis of the creep curves. This technique showed that it is possible to quantitatively identify the end points of the various creep stages as well as to identify crack initiation and crack advance events.","High resolution electron metallography was performed on the creep and creep rupture specimens, and a finite element analysis of smooth and notched specimens was used, in conjunction with this microstructural data, to aid in the interpretation of the smooth and notched specimen failures.","Made available in DSpace on 2011-05-07T13:32:43Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9026246.pdf: 3845057 bytes, checksum: 9c1c7ed183533a5e5cecb5bce316292e (MD5) Previous issue date: 1990","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:56:06Z Item is restricted indefinitely.","Restriction data tranferred 2014-07-01T11:26:12-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission","ETDs are only available to UIUC Users without author permission","U of I Only"],"dc:identifier":["AAI9026246","(UMI)AAI9026246","http://hdl.handle.net/2142/22214"],"dc:language":["eng"],"dc:rights":["Copyright 1990 Leet, David Michael"],"dc:subject":["Engineering, Nuclear","Engineering, Metallurgy","Engineering, Materials Science"],"dc:title":["Creep, fatigue, and environmental response of Alloy 800H tested at 900 degrees C"],"dc:type":["text"],"thesis:degree_discipline":["Materials Science and Engineering"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Ph.D."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:19Z"}