{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/19045"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/19045","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Modeling for anaerobic fixed-bed biofilm reactors","abstract":"Biofilm models, developed by previous researchers, were incorporated with an equilibrium model to study the physical and chemical aspects of the anaerobic fixed-bed biofilm reactors. In order to investigate the mechanism of equilibrium in an anaerobic biofilm reactor, a non-equilibrium model was derived from the equilibrium model to simulate the gas transfer process involved in biogas production. The equilibrium model well described the behavior of anaerobic fixed-bed biofilm reactors, which was verified in the experimental results. The non-equilibrium model showed that the contact area between the gas and the liquid phases is the pivotal factor controlling the state of equilibrium. This condition can only exist where there is sufficient contact area.","abstract_html":"Biofilm models, developed by previous researchers, were incorporated with an equilibrium model to study the physical and chemical aspects of the anaerobic fixed-bed biofilm reactors. In order to investigate the mechanism of equilibrium in an anaerobic biofilm reactor, a non-equilibrium model was derived from the equilibrium model to simulate the gas transfer process involved in biogas production. The equilibrium model well described the behavior of anaerobic fixed-bed biofilm reactors, which was verified in the experimental results. The non-equilibrium model showed that the contact area between the gas and the liquid phases is the pivotal factor controlling the state of equilibrium. This condition can only exist where there is sufficient contact area.","abstract_has_math":false,"creators":["Liu, Yeong-Ming Bill"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"Ph.D.","degree_level":"Dissertation","degree_discipline":"Environmental Engineering","degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-05-07T11:55:16Z","date_published":"2011-05-07T11:55:16Z","updated_at":"2026-07-22T22:25:12Z","subjects":["Civil Engineering","Environmental Sciences"],"languages":["eng"],"rights":["Copyright 1989 Liu, Yeong-Ming Bill"],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier","label":"Identifier","values":["AAI9010939","(UMI)AAI9010939"],"render_values":[{"text":"AAI9010939","href":null,"code":true},{"text":"(UMI)AAI9010939","href":null,"code":true}]}]},"links":{"outbound_url":"http://hdl.handle.net/2142/19045","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Liu, Yeong-Ming Bill"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2011-05-07T11:55:16Z","10000-01-01","1989"]},{"key":"dc:type","label":"Dc Type","values":["text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Environmental Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph.D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Civil Engineering","Environmental Sciences"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 1989 Liu, Yeong-Ming Bill"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["AAI9010939","(UMI)AAI9010939","http://hdl.handle.net/2142/19045"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Biofilm models, developed by previous researchers, were incorporated with an equilibrium model to study the physical and chemical aspects of the anaerobic fixed-bed biofilm reactors. In order to investigate the mechanism of equilibrium in an anaerobic biofilm reactor, a non-equilibrium model was derived from the equilibrium model to simulate the gas transfer process involved in biogas production. The equilibrium model well described the behavior of anaerobic fixed-bed biofilm reactors, which was verified in the experimental results. The non-equilibrium model showed that the contact area between the gas and the liquid phases is the pivotal factor controlling the state of equilibrium. This condition can only exist where there is sufficient contact area.","Operation of three different anaerobic fixed-bed biofilm reactors has substantiated that a packing material with higher specific surface area can immobilize more microorganisms, thus resulting in better treatment efficiency. However, the shear stress caused by different material might reduce the amount of biofilm retained in the reactor. In addition, the characteristics of the material also affect the effectiveness of the reactor. For example, granular activated carbon is so light and dense that the abrasion between these particles offsets the advantage of its large surface area. Experimental results also show that all biofilms are close to fully-penetrated, which simplifies the biofilm model by disregarding the resistances of the liquid layer and biofilm. Anaerobic fixed-bed biofilm reactors, in reality, behave like suspended-growth reactors.","The out-diffusion of end products in anaerobic biofilms was simulated by a diffusional model. Prediction of this model suggests that the methane concentration at the rear of biofilms is a function of the substrate concentration in the bulk liquid. As a result, a high substrate concentration in the reactor causes the biogas build-up at the back of biofilms and, eventually, sloughing. It is therefore concluded that the effective way to restore an unbalanced biofilm reactor is to decrease the feed until the bulk substrate concentration has been reduced to a level that will not cause sloughing.","Made available in DSpace on 2011-05-07T11:55:16Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9010939.pdf: 4929709 bytes, checksum: b15f22ac92bf90d564feaaf0b36ca7aa (MD5) Previous issue date: 1989","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:34:17Z Item is restricted indefinitely.","Restriction data tranferred 2014-07-01T11:13:02-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission","ETDs are only available to UIUC Users without author permission","U of I Only"]},{"key":"dc:title","label":"Title","values":["Modeling for anaerobic fixed-bed biofilm reactors"]}]}],"canonical_facts":{"dc:creator":["Liu, Yeong-Ming Bill"],"dc:date":["2011-05-07T11:55:16Z","10000-01-01","1989"],"dc:description":["Biofilm models, developed by previous researchers, were incorporated with an equilibrium model to study the physical and chemical aspects of the anaerobic fixed-bed biofilm reactors. In order to investigate the mechanism of equilibrium in an anaerobic biofilm reactor, a non-equilibrium model was derived from the equilibrium model to simulate the gas transfer process involved in biogas production. The equilibrium model well described the behavior of anaerobic fixed-bed biofilm reactors, which was verified in the experimental results. The non-equilibrium model showed that the contact area between the gas and the liquid phases is the pivotal factor controlling the state of equilibrium. This condition can only exist where there is sufficient contact area.","Operation of three different anaerobic fixed-bed biofilm reactors has substantiated that a packing material with higher specific surface area can immobilize more microorganisms, thus resulting in better treatment efficiency. However, the shear stress caused by different material might reduce the amount of biofilm retained in the reactor. In addition, the characteristics of the material also affect the effectiveness of the reactor. For example, granular activated carbon is so light and dense that the abrasion between these particles offsets the advantage of its large surface area. Experimental results also show that all biofilms are close to fully-penetrated, which simplifies the biofilm model by disregarding the resistances of the liquid layer and biofilm. Anaerobic fixed-bed biofilm reactors, in reality, behave like suspended-growth reactors.","The out-diffusion of end products in anaerobic biofilms was simulated by a diffusional model. Prediction of this model suggests that the methane concentration at the rear of biofilms is a function of the substrate concentration in the bulk liquid. As a result, a high substrate concentration in the reactor causes the biogas build-up at the back of biofilms and, eventually, sloughing. It is therefore concluded that the effective way to restore an unbalanced biofilm reactor is to decrease the feed until the bulk substrate concentration has been reduced to a level that will not cause sloughing.","Made available in DSpace on 2011-05-07T11:55:16Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9010939.pdf: 4929709 bytes, checksum: b15f22ac92bf90d564feaaf0b36ca7aa (MD5) Previous issue date: 1989","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:34:17Z Item is restricted indefinitely.","Restriction data tranferred 2014-07-01T11:13:02-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission","ETDs are only available to UIUC Users without author permission","U of I Only"],"dc:identifier":["AAI9010939","(UMI)AAI9010939","http://hdl.handle.net/2142/19045"],"dc:language":["eng"],"dc:rights":["Copyright 1989 Liu, Yeong-Ming Bill"],"dc:subject":["Civil Engineering","Environmental Sciences"],"dc:title":["Modeling for anaerobic fixed-bed biofilm reactors"],"dc:type":["text"],"thesis:degree_discipline":["Environmental Engineering"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Ph.D."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:12Z"}