{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/18596"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/18596","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Explosive initiation of tungsten based reactive materials in air","abstract":"Two facilities were designed and constructed at the University of Illinois for the purpose of evaluating the enhanced blast effect of reactive materials (RM’s) initiated by a high explosive detonation. High speed pressure, shadowgraph imaging, pyrometry and spectroscopy diagnostics were developed and used concurrently for tests conducted in these facilities. Well known thermite, intermetallic and reactive metal compounds were detonated in the smaller of the two facilities. Increased pressure and light emission were measured from these RMs as compared to tests of inert steel and no material (“bare”). Shockwave velocity was similar for all tests with an RM; bare tests had a significantly higher initial velocity due to decreased impedance from the lack of an RM in the detonation path. When Aluminum was tested, AlO emission was observed in the spectra captured, but temperature calculations from pyrometry and spectroscopy data were inconsistent between tests and relative to values in the literature. These results allowed for refinement of diagnostic techniques for subsequent tests. A series of tests was conducted in the larger facility to investigate the effect of the addition of tungsten to RM’s. Quasistatic pressure (QSP) differences were observed between inert, Al-based, and Zr based tests, but all materials containing zirconium or hafnium performed similarly. QSP was converted to energy, and values for most W-containing materials were higher than the theoretical chemical energy of the non-W components of the RM, indicating that tungsten must be contributing energy to the reaction. For Zr40-W60, observed energy release was 173% of the potential energy of the Zr present. However, WO3 was not observed by XRD in powder residues collected. Due to limitations, uncertainty and quantitative error in the XRD analysis, tungsten could have reacted without observation in the residue. Further elemental analysis of the residue with a SEM/EDS process is recommended to resolve this discrepancy.","abstract_html":"Two facilities were designed and constructed at the University of Illinois for the purpose of evaluating the enhanced blast effect of reactive materials (RM’s) initiated by a high explosive detonation. High speed pressure, shadowgraph imaging, pyrometry and spectroscopy diagnostics were developed and used concurrently for tests conducted in these facilities. Well known thermite, intermetallic and reactive metal compounds were detonated in the smaller of the two facilities. Increased pressure and light emission were measured from these RMs as compared to tests of inert steel and no material (“bare”). Shockwave velocity was similar for all tests with an RM; bare tests had a significantly higher initial velocity due to decreased impedance from the lack of an RM in the detonation path. When Aluminum was tested, AlO emission was observed in the spectra captured, but temperature calculations from pyrometry and spectroscopy data were inconsistent between tests and relative to values in the literature. These results allowed for refinement of diagnostic techniques for subsequent tests. A series of tests was conducted in the larger facility to investigate the effect of the addition of tungsten to RM’s. Quasistatic pressure (QSP) differences were observed between inert, Al-based, and Zr based tests, but all materials containing zirconium or hafnium performed similarly. QSP was converted to energy, and values for most W-containing materials were higher than the theoretical chemical energy of the non-W components of the RM, indicating that tungsten must be contributing energy to the reaction. For Zr40-W60, observed energy release was 173% of the potential energy of the Zr present. However, WO3 was not observed by XRD in powder residues collected. Due to limitations, uncertainty and quantitative error in the XRD analysis, tungsten could have reacted without observation in the residue. Further elemental analysis of the residue with a SEM/EDS process is recommended to resolve this discrepancy.","abstract_has_math":false,"creators":["Coverdill, Andrew R."],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":["Glumac, Nick G.","Krier, Herman"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-01-21T22:51:09Z","date_published":"2011-01-21T22:51:09Z","updated_at":"2026-07-22T22:25:11Z","subjects":["Reactive Material","Detonation","Air Blast","Tungsten Oxidation","Zr-W","W-Zr"],"languages":["en"],"rights":["Copyright 2010 Andrew Robert Coverdill"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/18596","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Glumac, Nick G.","Krier, Herman"]},{"key":"dc:creator","label":"Author","values":["Coverdill, Andrew R."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2011-01-21T22:51:09Z","2013-01-22T11:00:20Z","2010-12"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Reactive Material","Detonation","Air Blast","Tungsten Oxidation","Zr-W","W-Zr"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Andrew Robert Coverdill"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/18596"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Two facilities were designed and constructed at the University of Illinois for the purpose of evaluating the enhanced blast effect of reactive materials (RM’s) initiated by a high explosive detonation. High speed pressure, shadowgraph imaging, pyrometry and spectroscopy diagnostics were developed and used concurrently for tests conducted in these facilities. Well known thermite, intermetallic and reactive metal compounds were detonated in the smaller of the two facilities. Increased pressure and light emission were measured from these RMs as compared to tests of inert steel and no material (“bare”). Shockwave velocity was similar for all tests with an RM; bare tests had a significantly higher initial velocity due to decreased impedance from the lack of an RM in the detonation path. When Aluminum was tested, AlO emission was observed in the spectra captured, but temperature calculations from pyrometry and spectroscopy data were inconsistent between tests and relative to values in the literature. These results allowed for refinement of diagnostic techniques for subsequent tests. A series of tests was conducted in the larger facility to investigate the effect of the addition of tungsten to RM’s. Quasistatic pressure (QSP) differences were observed between inert, Al-based, and Zr based tests, but all materials containing zirconium or hafnium performed similarly. QSP was converted to energy, and values for most W-containing materials were higher than the theoretical chemical energy of the non-W components of the RM, indicating that tungsten must be contributing energy to the reaction. For Zr40-W60, observed energy release was 173% of the potential energy of the Zr present. However, WO3 was not observed by XRD in powder residues collected. Due to limitations, uncertainty and quantitative error in the XRD analysis, tungsten could have reacted without observation in the residue. Further elemental analysis of the residue with a SEM/EDS process is recommended to resolve this discrepancy.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-11-10T15:04:23Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 3 Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5)","Made available in DSpace on 2011-01-21T22:51:09Z (GMT). No. of bitstreams: 4 Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5) license.txt: 4066 bytes, checksum: 5c91ec3585c99ec6ed080eb77b70be28 (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2011-01-21T22:53:43Z Item is restricted until 2013-01-21T22:53:34Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2013-01-22T11:00:20Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Mechanical Science and Engineering (ID: 675) No. of bitstreams: 5 Coverdill_Andrew.pdf.txt: 187005 bytes, checksum: 9aa93e1e2b6ff572aefc1f7c091e525f (MD5) Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5) license.txt: 4066 bytes, checksum: 5c91ec3585c99ec6ed080eb77b70be28 (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2013-01-22T11:00:20Z"]},{"key":"dc:title","label":"Title","values":["Explosive initiation of tungsten based reactive materials in air"]}]}],"canonical_facts":{"dc:contributor":["Glumac, Nick G.","Krier, Herman"],"dc:creator":["Coverdill, Andrew R."],"dc:date":["2011-01-21T22:51:09Z","2013-01-22T11:00:20Z","2010-12"],"dc:description":["Two facilities were designed and constructed at the University of Illinois for the purpose of evaluating the enhanced blast effect of reactive materials (RM’s) initiated by a high explosive detonation. High speed pressure, shadowgraph imaging, pyrometry and spectroscopy diagnostics were developed and used concurrently for tests conducted in these facilities. Well known thermite, intermetallic and reactive metal compounds were detonated in the smaller of the two facilities. Increased pressure and light emission were measured from these RMs as compared to tests of inert steel and no material (“bare”). Shockwave velocity was similar for all tests with an RM; bare tests had a significantly higher initial velocity due to decreased impedance from the lack of an RM in the detonation path. When Aluminum was tested, AlO emission was observed in the spectra captured, but temperature calculations from pyrometry and spectroscopy data were inconsistent between tests and relative to values in the literature. These results allowed for refinement of diagnostic techniques for subsequent tests. A series of tests was conducted in the larger facility to investigate the effect of the addition of tungsten to RM’s. Quasistatic pressure (QSP) differences were observed between inert, Al-based, and Zr based tests, but all materials containing zirconium or hafnium performed similarly. QSP was converted to energy, and values for most W-containing materials were higher than the theoretical chemical energy of the non-W components of the RM, indicating that tungsten must be contributing energy to the reaction. For Zr40-W60, observed energy release was 173% of the potential energy of the Zr present. However, WO3 was not observed by XRD in powder residues collected. Due to limitations, uncertainty and quantitative error in the XRD analysis, tungsten could have reacted without observation in the residue. Further elemental analysis of the residue with a SEM/EDS process is recommended to resolve this discrepancy.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-11-10T15:04:23Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 3 Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5)","Made available in DSpace on 2011-01-21T22:51:09Z (GMT). No. of bitstreams: 4 Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5) license.txt: 4066 bytes, checksum: 5c91ec3585c99ec6ed080eb77b70be28 (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2011-01-21T22:53:43Z Item is restricted until 2013-01-21T22:53:34Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2013-01-22T11:00:20Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Mechanical Science and Engineering (ID: 675) No. of bitstreams: 5 Coverdill_Andrew.pdf.txt: 187005 bytes, checksum: 9aa93e1e2b6ff572aefc1f7c091e525f (MD5) Coverdill_Andrew.pdf: 11855587 bytes, checksum: dedbad34b50afee0ebb347e949a3962a (MD5) license.txt: 4066 bytes, checksum: 5c91ec3585c99ec6ed080eb77b70be28 (MD5) Thesis 10-30-2010.docx: 38034664 bytes, checksum: 79dc7fdd6a88cae8eacae56c323f960f (MD5) Front Matter 11-01-2010.docx: 17620 bytes, checksum: 6f149bd0f1f325cad8610e87d2888f3a (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2013-01-22T11:00:20Z"],"dc:identifier":["http://hdl.handle.net/2142/18596"],"dc:language":["en"],"dc:rights":["Copyright 2010 Andrew Robert Coverdill"],"dc:subject":["Reactive Material","Detonation","Air Blast","Tungsten Oxidation","Zr-W","W-Zr"],"dc:title":["Explosive initiation of tungsten based reactive materials in air"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:11Z"}